The physical properties of active pharmaceutical ingredients (API) are critical to both drug substance (DS) isolation and drying operations, as well as streamlined drug product (DP) processing and the quality of final dosage units. High aspect ratio, low bulk density, API 'needles' in particular are a hindrance to efficient processing, with a low probability that conventional crystallization routes can modify the challenging morphology. The compound evaluated in this manuscript demonstrated this non-ideal morphology, with the added complexity of shear sensitivity. Modest shear exposure resulted in conversion of the thermodynamically stable crystalline phase to the amorphous phase, with the amorphous phase then undergoing accelerated chemical degradation. Slow filtration during DS isolation resulted in uncontrolled and elevated amorphous levels, while subsequent DP operations including blending, densification and compression increased amorphous content still further. A chemically stable final dosage unit would ideally involve a high bulk density, free flowing API that did not require densification in order to be commercialized as an oral dosage form with direct encapsulation of a single dosage unit. Despite every effort to modify the crystallization process, the physical properties of the API could not be improved. Here, an innovative isolation strategy using a thin film evaporation (TFE) process in the presence of a water soluble polymer alleviated filtration and drying risks and consistently achieved a high bulk density, free flowing co-processed API amenable to direct encapsulation. Characterization of the engineered materials suggested the lower amorphous levels and reduced shear sensitivity were achieved by coating surfaces of the API at relatively low polymer loads. This particle engineering route blurred conventional DS/DP boundaries that not only achieved improved chemical stability but also resulted in a optimized material, with simplified and more robust processing operations for both drug substance and drug product. (c) 2021 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.

• Merck & Co Inc

• API

1. API
2. continuous manufacturing
3. Co-processed API
4. Direct compression
5. Direct encapsulation
6. Particle engineering
7. Research Article
8. Shear sensitivity