-
Wet Granulation in a Twin-Screw Extruder: Implications of Screw Design
09 Jun 2023 | Contributor(s):: Thompson, M. R., Sun, J.
Wet granulation in twin-screw extrusion machinery is an attractive technology for the continuous processing of pharmaceuticals. The performance of this machinery is integrally tied to its screw design yet little fundamental knowledge exists in this emerging field for granulation to intelligently...
-
Real-Time Monitoring of Powder Mass Flowrates for Plant-Wide Control of a Continuous Direct Compaction Tablet Manufacturing Process
09 Jun 2023 | Contributor(s):: Huang, Yan-Shu, Medina-González, Sergio Straiton, Benjamin Keller, Joshua, Marashdeh, Qussai, Gonzalez, Marcial, Nagy, Zoltan, Reklaitis, Gintaras V.
While measurement and monitoring of powder/particulate mass flow rate are not essential to the execution of traditional batch pharmaceutical tablet manufacturing, in continuous operation, it is an important additional critical process parameter. It has a key role both in establishing that the...
-
Powder technology in the pharmaceutical industry: the need to catch up fast
09 Jun 2023 | Contributor(s):: Fernando J. Muzzio, Troy Shinbrot, Benjamin JGlasser
Pharmaceutical product development and manufacturing, which is largely an exercise in particle technology, is in serious need of technical upgrading. In this article, an overview of the current state of the art is provided, along with a discussion of expected Research Article trends and their...
-
Investigation of the effect of impeller rotation rate, powder flow rate, and cohesion on powder flow behavior in a continuous blender using PEPT
09 Jun 2023 | Contributor(s):: Portillo, PM, Vanarase, AU, Ingram, A, Seville, JK, Ierapetritou, MG, Muzzio, FJ
In this paper, we examine the movement of particles within a continuous powder mixer using PEPT (Positron Emission Particle Tracking). The benefit of the approach is that the particle movement along the vessel can be measured non-invasively. The effect of impeller rotation rate, powder flow rate,...
-
Development and Optimization of a Wet Granulation Process at Elevated Temperature for a Poorly Compactible Drug Using Twin Screw Extruder for Continuous Manufacturing
09 Jun 2023 | Contributor(s):: Meena, Anuprabha K, Desai, Divyakant, Serajuddin,, Abu T. M.
The objective of this study was to enhance tabletability of a poorly compactible drug, acetaminophen, by wet granulation using twin screw extruder at high temperature. It was desired that there would be minimum amounts of excipients used and the granules obtained after extrusion would be dry and...
-
Concurrent Antisolvent Electrospraying: A Novel Continuous Crystallization Technique
09 Jun 2023 | Contributor(s):: Perge, L, Grols, JSegura, DF, Al-Ani, A, Wilkinson, M, Castro-Dominguez, B
Pharmaceutical co-crystals (CCs) are multicomponent materials that enable the development of novel therapeutic products by enhancing the properties of active pharmaceutical ingredients, such as solubility, permeability and bioavailability. Currently, CCs are a commercial reality; theless, their...
-
Application of X-Ray Sensors for In-line and Noninvasive Monitoring of Mass Flow Rate in Continuous Tablet Manufacturing
09 Jun 2023 | Contributor(s):: Ganesh, Sudarshan, Troscinski, Rachel, Schmall, Nicholas, Nagy, Zoltan, Reklaitis, Gintaras
The progress in continuous downstream manufacturing of oral solid doses demands effective real-time process management, with monitoring at its core. This study evaluates the feasibility of using a commercial sensor to measure the mass flow rate of the particulates, a critical process variable in...
-
A sampling system for flowing powders based on the theory of sampling
09 Jun 2023 | Contributor(s):: Alvarado-Hernández, Bárbara B, Sierra-Vega, Nobel O, Martínez-Cartagena, Pedro, Hormaza, Manuel, Méndez, Rafael, Romañach, Rodolfo J.
An innovative chute and stream sampler system for flowing powders has been developed and tested. The system is designed for representative sampling based on the principles of the Theory of Sampling (TOS). The sampling system was used in combination with near infrared (NIR) spectroscopy to...