Skip to main content
3.133.130.105

A modeling and control framework for extraction processes

By Peter Neugebauer1; Jakob Rehrl1; Peter Poechlauer2; Dirk Kirschneck; Martin Horn3; Martin Steinberger3; Stephan Sacher1; Joscha Boehm1; Daniel Moser1

1. Research Center Pharmaceutical Engineering GmbH 2. Thermo Fisher Scientific Linz 3. Microinnova Engineering GmbH

Published on CMKC

Abstract

Many continuously operated pharmaceutical process routes have been presented recently. Most of these cover the synthesis of the active pharmaceutical ingredient (API) or solid dosage processing. However, the API purification is also gaining attraction. One widespread and waste-intensive unit operation for purification is the liquid–liquid-extraction (LLE). In continuous manufacturing active process control is required, especially for fast processes. Control concepts must be able to react on product quality deviations caused by disturbances or inadequate process settings in real-time. In this study different control concepts for LLE were developed for an extraction column and a multistage extraction. A universally applicable process model was derived and parametrized. The impact of several control concepts including different real-time measurements was evaluated in simulation for both LLE process routes. The results show that simulation tools based on proper process models can support the selection of the most efficient process route and of suitable control concepts.

Journal

Chemical Engineering Science

DOI

10.1016/j.ces.2024.120384

Type of publication

Peer-reviewed journal

Affiliations

  • Research Center Pharmaceutical Engineering GmbH, Inffeldgasse 13/2, 8010 Graz, Austria
  • Thermo Fisher Scientific Linz, St.-Peter-Straße 25, 4020 Linz, Austria
  • Microinnova Engineering GmbH, Europapark 1, 8412 Allerheiligen bei Wildon, Austria
  • Institute of Automation and Control, Graz University of Technology, Inffeldgasse 21b, 8010 Graz Austria

Article Classification

Review article

Classification Areas

  • API
  • Process Control

Tags