A comparative review of multi-rate moving horizon estimation schemes for bioprocess applications

09 Jun 2023 | Contributor(s): Elsheikh, Mohamed, Hille, Rubin Tatulea-Codrean, Alexandru, Kramer, Stefan

Advanced control and monitoring of bioprocesses are dependent on accurate state and parameter information. At the same time, bioprocesses are well known for their time-varying behavior and difficulty of obtaining online measurements of the important process states. The selection and the tuning of...

A Continuous Operation Concept for a Rotary Tablet Press Using Mass Flow Operating Points

09 Jun 2023 | Contributor(s): Martinetz, Michael Christian, Rehrl, Jakob Aigner, Isabella Sacher, Stephan, Khinast, Johannes

Abstract In a continuous pharmaceutical manufacturing line the rotary tablet press was viewed as the master of control concept and defined the mass flow through the entire process. According to a conventional control concept, missing mass flow from an upstream unit operation leads to a shutdown...

A fast moving horizon estimation algorithm based on nonlinear programming sensitivity

09 Jun 2023 | Contributor(s): Zavala, Victor M, Laird, Carl D, Biegler, Lorenz T

Moving horizon estimation (MHE) is an efficient optimization-based strategy for state estimation. Despite the attractiveness of this method, its application in industrial settings has been rather limited. This has been mainly due to the difficulty to solve, in real-time, the associated dynamic...

A Hybrid MPC-PID Control System Design for the Continuous Purification and Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Contributor(s): Sen, M, Singh, R, Ramachandran, R

In this work, a hybrid MPC (model predictive control)-PID (proportional-integral-derivative) control system has been designed for the continuous purification and processing framework of active pharmaceutical ingredients (APIs). The specific unit operations associated with the purification and...

A hybrid neural network-first principles approach to process modeling

09 Jun 2023 | Contributor(s): Psichogios, Dimitris C., Ungar, Lyle H.

A hybrid neural network‐first principles modeling scheme is developed and used to model a fedbatch bioreactor. The hybrid model combines a partial first principles model, which incorporates the available prior knowledge about the process being modeled, with a neural network which...

A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations

09 Jun 2023 | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza

Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...

A Moving Horizon Estimator for processes with multi-rate measurements: A Nonlinear Programming sensitivity approach

09 Jun 2023 | Contributor(s): Lopez-Negrete, Rodrigo, Biegler, Lorenz T.

Moving Horizon Estimation (MHE) provides a framework that allows one to incorporate both frequent and infrequent observations easily because it uses a window of past measurements, where the slower ones can be introduced as they become available. Also, MHE allows for the use of constraints on the...

A Moving Horizon-Based Approach for Least-Squares Estimation

09 Jun 2023 | Contributor(s): Robertson, Douglas G., Lee, Jay H., Rawlings, James B.

A general formulation of the moving horizon estimator is presented. An algorithm with a fixed-size estimation window and constraints on states, disturbances, and measurement noise is developed, and a probabilistic interpretation is given. The moving horizon formulation requires only one more...

A New Software Framework for Implementing Crystal Growth Models to Materials of Any Crystallographic Complexity

09 Jun 2023 | Contributor(s): Zhao, Yongsheng, Tilbury, Carl J. Landis, Steven Sun, Yuanyuan, Li, Jinjin, Zhu, Peng, Doherty, Michael F.

To continue the realization of new therapeutics, a more diverse range of solid forms is being considered. Synthetic modalities are broadening beyond simple organic molecules to more complicated structures, including organic salts, cocrystals, and solvates. As in all crystalline applications,...

A Novel Integrated Workflow for Isolation Solvent Selection Using Prediction and Modeling

09 Jun 2023 | Contributor(s): Ottoboni, S, Wareham, BVassileiou, A, Robertson, M, Brown, CJ, Johnston, B, Price, CJ

A predictive tool was developed to aid process design and to rationally select optimal solvents for isolation of active pharmaceutical ingredients. The objective was to minimize the experimental work required to design a purification process by (i) starting from a rationally selected...

A novel robust digital design of a network of industrial continuous cooling crystallizers of dextrose monohydrate: From laboratory experiments to industrial application

09 Jun 2023 | Contributor(s): Nagy, Zoltan K., Szilagyi, Botond Pal, Kanjakha, Tabar, Iman Beheshti ;

This paper presents the first-ever industrial application of the digital design of a complex, large-scale industrial continuous crystallization network. The aim of the work is to optimize a large-scale continuous crystallization network used for the purification of dextrose monohydrate, by...

A novel robust digital design of a network of industrial continuous cooling crystallizers of dextrose monohydrate: From laboratory experiments to industrial application

09 Jun 2023 | Contributor(s): Nagy, Zoltan K., Szilagyi, Botond Pal, Kanjakha, Tabar, Iman Beheshti ;

This paper presents the first-ever industrial application of the digital design of a complex, large-scale industrial continuous crystallization network. The aim of the work is to optimize a large-scale continuous crystallization network used for the purification of dextrose monohydrate, by...

A perspective on Quality-by-Control (QbC) in pharmaceutical continuous manufacturing

09 Jun 2023 | Contributor(s): Su, Qinglin, Ganesh, Sudarshan Moreno, Mariana Bommireddy, Yasasvi, Gonzalez, Marcial, Reklaitis, Gintaras V., Nagy, Zoltan K.

The Quality-by-Design (QbD) guidance issued by the US Food and Drug Administration (FDA) has catalyzed the modernization of pharmaceutical manufacturing practices including the adoption of continuous manufacturing. Active process control was highlighted recently as a means to improve the QbD...

A Process for the Formation of Nanocrystals of Active Pharmaceutical Ingredients with Poor Aqueous Solubility in a Nanoporous Substrate

09 Jun 2023 | Contributor(s): O'Mahony, M, Leung, AKFerguson, S, Trout, BL, Myerson, AS

A potential process for the formation of nanocrystals of the poorly soluble drug, ibuprofen, within a nanoporous material is demonstrated. Nanocrystalline ibuprofen (IBP) is prepared at <= 106 nm by adding a solution containing IBP to particles of controlled pore glass (CPG) within a column so...

A review of emerging technologies enabling improved solid oral dosage form manufacturing and processing

09 Jun 2023 | Contributor(s): Sohail Arshad, Muhammad, Zafar, Saman, Yousef, Bushra, Alyassin, Yasmine, Ali, Radeyah, AlAsiri, Ali, Chang, Ming-Wei, Ahmad, Zeeshan, Ali Elkordy, Amal, Faheem, Ahmed, Pitt, Kendal

Tablets are the most widely utilized solid oral dosage forms because of the advantages of self-administration, stability, ease of handling, transportation, and good patient compliance. Over time, extensive advances have been made in tableting technology. This review aims to provide an insight...

A review of PAT strategies in secondary solid oral dosage manufacturing of small molecules

09 Jun 2023 | Contributor(s): Laske, Stephan, Paudel, Amrit, Scheibelhofer, Otto, Sacher, Stephan, Hoermann, Theresa, Khinast, Johannes, Kelly, Adrian, Rantannen, Jukka, Korhonen, Ossi, Stauffer, Fanny, De Leersnyder, Fien, De Beer, Thomas, Mantanus, Jerome, Chavez, Pierre-Francois, Thoorens, Benjamin, Ghiotti, Patrizia, Schubert, Martin, Tajarobi, Pirjo, Haeffler, Gunnar, Lakio, Satu, Fransson, Magnus, Sparen, Anders, Abrahmsen-Alami, Susanna, Folestad, Staffan, Funke, Adrian, Backx, Ivo, Kavsek, Barbara, Kjell, Francois, Michaelis, Marc, Page, Trevor, Palmer, John, Schaepman, Alexander, Sekulic, Sonja, Hammond, Steve, Braun, Birgit, Colegrove, Brenda

Pharmaceutical solid oral dosage product manufacturing is a well-established, yet revolutionizing area. To this end, process analytical technology (PAT) involves interdisciplinary and multivariate (chemical, physical, microbiological and mathematical) methods for material (e.g. materials,...

A sampling system for flowing powders based on the theory of sampling

09 Jun 2023 | Contributor(s): Alvarado-Hernández, Bárbara B, Sierra-Vega, Nobel O, Martínez-Cartagena, Pedro, Hormaza, Manuel, Méndez, Rafael, Romañach, Rodolfo J.

An innovative chute and stream sampler system for flowing powders has been developed and tested. The system is designed for representative sampling based on the principles of the Theory of Sampling (TOS). The sampling system was used in combination with near infrared (NIR) spectroscopy to...

A Stochastic Population Balance Equation Model for Nucleation and Growth of Crystals with Multiple Polymorphs

09 Jun 2023 | Contributor(s): Maggioni, Giovanni, Mazzotti, Marco

Understanding polymorph crystallization is important due to the different properties, such as bioavailability or crystal shape, exhibited by the different crystal forms. In this work, we present a model, based on population balance equations, describing the unseeded crystallization by cooling of...

A Structured Approach To Cope with Impurities during Industrial Crystallization Development

09 Jun 2023 | Contributor(s): Urwin, SJ, Levilain, GMarziano, I, Merritt, JM, Houson, I, Ter;Horst, JH

The perfect separation with optimal productivity, yield, and purity is very difficult to achieve. Despite its high selectivity, in crystallization unwanted impurities routinely contaminate a crystallization product. Awareness of the mechanism by which the impurity incorporates is key to...

A Systematic Framework for Process Control Design and Risk Analysis in Continuous Pharmaceutical Solid-Dosage Manufacturing

09 Jun 2023 | Contributor(s): Su, Qinglin, Moreno, Mariana, Giridhar, Arun, Reklaitis, Gintaras, Nagy, Zoltan

The paradigm shift in the pharmaceutical industry to continuous manufacturing, which has recently progressed from conceptual demonstration to pilot production, has stimulated the development and application of process systems engineering (PSE) tools for implementing efficient and robust control...

A Systematic Framework for the Design and Implementation of Sensing and Control Architecture for a Continuous Pharmaceutical Manufacturing Plant

09 Jun 2023 | Contributor(s): Singh, Ravendra, Muzzio, Fernando J Ierapetritou, Marianthi, Ramachnadran, Rohit

The continuous pharmaceutical manufacture (CPM) plant and control architecture developed earlier is currently being widely implemented in industries [1,2]. CPM indeed provides an appropriate platform to implement suitable monitoring and control architecture, to improve product quality, and to...

A Virtual Plant for Integrated Continuous Manufacturing of a Carfilzomib Drug Substance Intermediate, Part 1: CDI-Promoted Amide Bond Formation

09 Jun 2023 | Contributor(s): Içten, Elçin, Maloney, Andrew J., Beaver, Matthew G., Shen, Dongying E., Zhu, Xiaoxiang, Graham, Lauren R., Robinson, Jo A., Huggins, Seth, Allian, Ayman, Hart, Roger, Walker,Shawn D., Rolandi, Pablo, Braatz, Richard D.

This article details process characterization efforts and the development of corresponding process models to inform a process control strategy to produce a carfilzomib drug substance intermediate, morpholine amide 3. Model calibration for relevant unit operations and development of a dynamic...

A Virtual Plant for Integrated Continuous Manufacturing of a Carfilzomib Drug Substance Intermediate, Part 3: Manganese-Catalyzed Asymmetric Epoxidation, Crystallization, and Filtration

25 Jun 2024 | Contributor(s): Maloney, Andrew J., Içten, Elçin, Capellades, Gerard, Beaver, Matthew G., Zhu, Xiaoxiang, Graham, Lauren R., Brown, Derek B., Griffin, Daniel J., Sangodkar, Rahul, Allian, Ayman, Huggins, Seth, Hart, Roger, Rolandi, Pablo, Walker, Shawn D., Braatz, Richard D.

This article describes the process characterization and development of models to inform a process control strategy to prepare (R,R)-epoxy ketone 2, an intermediate in the manufacture of carfilzomib. Model calibration for relevant unit operations and the development of a dynamic integrated...

A Virtual Plant for Integrated Continuous Manufacturing of a Carfilzomib Drug Substance Intermediate, Part 3: Manganese-Catalyzed Asymmetric Epoxidation, Crystallization, and Filtration

23 Jul 2024 | Contributor(s): Maloney, Andrew J., Içten, Elçin, Capellades, Gerard, Beaver, Matthew G., Zhu, Xiaoxiang, Graham, Lauren R., Brown, Derek B., Griffin, Daniel J., Sangodkar, Rahul, Allian, Ayman, Huggins, Seth, Hart, Roger, Rolandi, Pablo, Walker, Shawn D., Braatz, Richard D.

This article describes the process characterization and development of models to inform a process control strategy to prepare (R,R)-epoxy ketone 2, an intermediate in the manufacture of carfilzomib. Model calibration for relevant unit operations and the development of a dynamic integrated...

Achieving Continuous Manufacturing: Technologies and Approaches for Synthesis, Workup, and Isolation of Drug Substance May 20-21, 2014 Continuous Manufacturing Symposium

09 Jun 2023 | Contributor(s): Baxendale, IR, Braatz, RDHodnett, BK, Jensen, KF, Johnson, MD, Sharratt, P, Sherlock, JP, Florence, AJ

This whitepaper highlights current challenges and opportunities associated with continuous synthesis, workup, and crystallization of active pharmaceutical ingredients (drug substances). We describe the technologies and requirements at each stage and emphasize the different considerations for...