3D printing and continuous flow chemistry technology to advance pharmaceutical manufacturing in developing countries

09 Jun 2023 | Contributor(s): Sagandira, CR, Siyawamwaya, M, Watts, P

The realization of a downward spiralling of diseases in developing countries requires them to become self-sufficient in pharmaceutical products. One of the ways to meet this need is by boosting the local production of active pharmaceutical ingredients and embracing enabling technologies. Both 3D...

A brief review on Process Analytical Technology (PAT)

09 Jun 2023 | Contributor(s): Mali, Akash, Jagtap, Monali, Karekar, P., Maruska, A

Process analytical technology (PAT) has been defined as a mechanism to design, analyze and control pharmaceutical manufacturing processes through measurement of critical process parameters which affect critical quality attributes. PAT checks the quality of raw material attributes both physically...

A Combined Feed-Forward/Feed-Back Control System for a QbD-Based Continuous Tablet Manufacturing Process

09 Jun 2023 | Contributor(s): Singh, Ravendra, Muzzio, Fernando J, Ierapetritou, Marianthi, Ramachandran, Rohit

Continuous pharmaceutical manufacturing together with PAT (Process Analytical Technology) provides a suitable platform for automatic control of the end product quality as desired by QbD (quality by design)-based efficient manufacturing. The precise control of the quality of the pharmaceutical...

A comparative review of multi-rate moving horizon estimation schemes for bioprocess applications

09 Jun 2023 | Contributor(s): Elsheikh, Mohamed, Hille, Rubin Tatulea-Codrean, Alexandru, Kramer, Stefan

Advanced control and monitoring of bioprocesses are dependent on accurate state and parameter information. At the same time, bioprocesses are well known for their time-varying behavior and difficulty of obtaining online measurements of the important process states. The selection and the tuning of...

A comprehensive overview of extended release oral dosage forms manufactured through hot melt extrusion and its combination with 3D printing

09 Jun 2023 | Contributor(s): Nashed, Nour, Lam, Matthew, Nokhodchi, Ali

Oral dosage formulations are considered to be the most convenient pharmaceutical dosage forms for almost all ages because of their simplicity and non-invasive administration compared to other dosage forms. To improve therapeutic efficacy and avoid frequent daily doses, extending drug release...

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

09 Jun 2023 | Contributor(s): Gambacorta, G, Sharley, JS, Baxendale, IR

Due to their intrinsic physical properties, which includes being able to perform as volatile liquids at room and biological temperatures, fragrance ingredients/intermediates make ideal candidates for continuous-flow manufacturing. This review highlights the potential crossover between a...

A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine

25 Jun 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler

We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...

A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine

23 Jul 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler

We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...

A Continuous Operation Concept for a Rotary Tablet Press Using Mass Flow Operating Points

09 Jun 2023 | Contributor(s): Martinetz, Michael Christian, Rehrl, Jakob Aigner, Isabella Sacher, Stephan, Khinast, Johannes

Abstract In a continuous pharmaceutical manufacturing line the rotary tablet press was viewed as the master of control concept and defined the mass flow through the entire process. According to a conventional control concept, missing mass flow from an upstream unit operation leads to a shutdown...

A Continuous Process for Buchwald–Hartwig Amination at Micro-, Lab-, and Mesoscale Using a Novel Reactor Concept

25 Jun 2024 | Contributor(s): Falß, Sebastian, Tomaiuolo, Giovanna, Perazzo, Antonio, Hodgson, Paul, Yaseneva, Polina, Zakrzewski, Jacek, Guido, Stefano, Lapkin, Alexei, Woodward, Robert, Meadows, Rebecca E.

A continuous Buchwald–Hartwig reaction using the bulky N-heterocyclic carbene (NHC) precatalyst [Pd(IPr*)(cin)Cl] 4 has been developed for the synthesis of a key pharmaceutical intermediate 2. Using microreactor technology, the reaction could be optimized under dilute conditions with low material...

A Continuous Process for Buchwald–Hartwig Amination at Micro-, Lab-, and Mesoscale Using a Novel Reactor Concept

23 Jul 2024 | Contributor(s): Falß, Sebastian, Tomaiuolo, Giovanna, Perazzo, Antonio, Hodgson, Paul, Yaseneva, Polina, Zakrzewski, Jacek, Guido, Stefano, Lapkin, Alexei, Woodward, Robert, Meadows, Rebecca E.

A continuous Buchwald–Hartwig reaction using the bulky N-heterocyclic carbene (NHC) precatalyst [Pd(IPr*)(cin)Cl] 4 has been developed for the synthesis of a key pharmaceutical intermediate 2. Using microreactor technology, the reaction could be optimized under dilute conditions with low material...

A design aid for crystal growth engineering

09 Jun 2023 | Contributor(s): Li, Jinjin, Tilbury, Carl J. Kim, Seung Ha, Doherty, Michael F.

With the highly competitive development of chemical and pharmaceutical industries, mastering crystal growth is becoming increasingly necessary. Modern industrial manufacturers place high importance on the ability to grow crystals with a specific habit using tailored operating conditions. A...

A Digital Twin for Process Optimisation in Pharmaceutical Manufacturing

09 Jun 2023 | Contributor(s): Gerogiorgis, Dimitrios I., Castro-Rodriguez, Daniel

Organic synthesis is a critical step in producing any Active Pharmaceutical Ingredient (API): it encompasses a series of organic (mostly catalytic) reactions and separations, whose purpose is to arrive at a solution of a target molecule, which must then undergo crystallisation for purification,...

A fast moving horizon estimation algorithm based on nonlinear programming sensitivity

09 Jun 2023 | Contributor(s): Zavala, Victor M, Laird, Carl D, Biegler, Lorenz T

Moving horizon estimation (MHE) is an efficient optimization-based strategy for state estimation. Despite the attractiveness of this method, its application in industrial settings has been rather limited. This has been mainly due to the difficulty to solve, in real-time, the associated dynamic...

A fast moving horizon estimation algorithm based on nonlinear programming sensitivity

09 Jun 2023 | Contributor(s): Zavala, Victor M, Laird, Carl D, Biegler, Lorenz T

Moving horizon estimation (MHE) is an efficient optimization-based strategy for state estimation. Despite the attractiveness of this method, its application in industrial settings has been rather limited. This has been mainly due to the difficulty to solve, in real-time, the associated dynamic...

A Flow Process Built upon a Batch Foundation—Preparation of a Key Amino Alcohol Intermediate via Multistage Continuous Synthesis

25 Jun 2024 | Contributor(s): Lim, John Jin, Arrington, Kenneth, Dunn, Anna L., Leitch, David C., Andrews, Ian, Curtis, Neil R., Hughes, Mark J., Tray, Daniel R., Wade, Charles E., Whiting, Matthew P., Goss, Charles, Liu, Yangmu Chloe, Roesch, Brian M.

This paper describes recent efforts to apply flow technology in the preparation of the key amino alcohol intermediate 3b so as to address manufacturability issues present in the batch process of a PRMT5 inhibitor. The continuous process, one of the first reported pharmaceutical processes to use...

A Flow Process Built upon a Batch Foundation—Preparation of a Key Amino Alcohol Intermediate via Multistage Continuous Synthesis

23 Jul 2024 | Contributor(s): Lim, John Jin, Arrington, Kenneth, Dunn, Anna L., Leitch, David C., Andrews, Ian, Curtis, Neil R., Hughes, Mark J., Tray, Daniel R., Wade, Charles E., Whiting, Matthew P., Goss, Charles, Liu, Yangmu Chloe, Roesch, Brian M.

This paper describes recent efforts to apply flow technology in the preparation of the key amino alcohol intermediate 3b so as to address manufacturability issues present in the batch process of a PRMT5 inhibitor. The continuous process, one of the first reported pharmaceutical processes to use...

A flowsheet model for the development of a continuous process for pharmaceutical tablets: An industrial perspective

09 Jun 2023 | Contributor(s): Garcia-Munoz, Salvador, Butterbaugh, Adam Leavesley, Ian Manley, Leo Francis, Slade, David, Bermingham, Sean

A dynamic model of a continuous direct compression process for pharmaceutical tablets is presented. The objective is to assess the impact of the variability from the feeder system on the concentration of drug in the powder in the feed frame of a tablet press. The model is based on principles of...

A framework for model reliability and estimability analysis of crystallization processes with multi-impurity multi-dimensional population balance models

09 Jun 2023 | Contributor(s): Fysikopoulos, D, Benyahia, B Borsos, A Nagy, Z K, Rielly, C D

The development of reliable mathematical models for crystallization processes may be very challenging due the complexity of the underlying phenomena, the inherent Population Balance Models (PBMs) and the large number of parameters that need to be identified from experimental data. Due to the poor...

A Hybrid MPC-PID Control System Design for the Continuous Purification and Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Contributor(s): Sen, M, Singh, R, Ramachandran, R

In this work, a hybrid MPC (model predictive control)-PID (proportional-integral-derivative) control system has been designed for the continuous purification and processing framework of active pharmaceutical ingredients (APIs). The specific unit operations associated with the purification and...

A hybrid neural network-first principles approach to process modeling

09 Jun 2023 | Contributor(s): Psichogios, Dimitris C., Ungar, Lyle H.

A hybrid neural network‐first principles modeling scheme is developed and used to model a fedbatch bioreactor. The hybrid model combines a partial first principles model, which incorporates the available prior knowledge about the process being modeled, with a neural network which...

A hybrid neural network-first principles approach to process modeling

09 Jun 2023 | Contributor(s): Psichogios, Dimitris C., Ungar, Lyle H.

A hybrid neural network‐first principles modeling scheme is developed and used to model a fedbatch bioreactor. The hybrid model combines a partial first principles model, which incorporates the available prior knowledge about the process being modeled, with a neural network which...

A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations

09 Jun 2023 | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza

Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...

A model-based framework for design and analysis of PAT systems

09 Jun 2023 | Workshop | Contributor(s): Gani, Rafiqul, Singh, Ravendra, Gernaey, Krist

A Moving Horizon Estimator for processes with multi-rate measurements: A Nonlinear Programming sensitivity approach

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Lopez-Negrete, Rodrigo, Biegler, Lorenz T.

Moving Horizon Estimation (MHE) provides a framework that allows one to incorporate both frequent and infrequent observations easily because it uses a window of past measurements, where the slower ones can be introduced as they become available. Also, MHE allows for the use of constraints on the...