100% visual inspection of tablets produced with continuous direct compression and coating

09 Jun 2023 | Contributor(s): Barimani, Shirin, Sibanc, Rok, Tomazevic, Dejan, Meier, Robin, Kleinebudde, Peter

Visual appearance of tablets is an important property for patients. Since the visual appearance is most strongly influenced by the applied coating, this necessitates a high level of process control and homogeneity in the coating process. In recent years, a number of tablet coaters have been...

A brief review on Process Analytical Technology (PAT)

09 Jun 2023 | Contributor(s): Mali, Akash, Jagtap, Monali, Karekar, P., Maruska, A

Process analytical technology (PAT) has been defined as a mechanism to design, analyze and control pharmaceutical manufacturing processes through measurement of critical process parameters which affect critical quality attributes. PAT checks the quality of raw material attributes both physically...

A Combined Feed-Forward/Feed-Back Control System for a QbD-Based Continuous Tablet Manufacturing Process

09 Jun 2023 | Contributor(s): Singh, Ravendra, Muzzio, Fernando J, Ierapetritou, Marianthi, Ramachandran, Rohit

Continuous pharmaceutical manufacturing together with PAT (Process Analytical Technology) provides a suitable platform for automatic control of the end product quality as desired by QbD (quality by design)-based efficient manufacturing. The precise control of the quality of the pharmaceutical...

A comprehensive overview of extended release oral dosage forms manufactured through hot melt extrusion and its combination with 3D printing

09 Jun 2023 | Contributor(s): Nashed, Nour, Lam, Matthew, Nokhodchi, Ali

Oral dosage formulations are considered to be the most convenient pharmaceutical dosage forms for almost all ages because of their simplicity and non-invasive administration compared to other dosage forms. To improve therapeutic efficacy and avoid frequent daily doses, extending drug release...

A Focused and Flexible Analytical Strategy is Key to Unlocking the Benefits of Continuous Manufacturing

11 Apr 2024 | Website | Contributor(s): Bikash Chatterjee

Continuous manufacturing processes promise shorter manufacturing cycle times without the need for intermediate storage, sampling testing and release of intermediate process steps, and shorter product release times through the intelligent application of in-line and at-line testing strategies....

A Framework for Representative Sampling for NIR Analysis – Theory of Sampling (TOS)

09 Jun 2023 | Chapter Book | Contributor(s): Esbensen, Kim H, Ciurczak, Emil W., Igne, Benoît, Workman, Jr.,Jerome, Burns, Donald A., Romañach, Rodolfo J.

This chapter deals with all critical steps before near-infrared spectroscopy (NIR) analysis, irrespective of whether the total sampling error contribution is large, intermediate, or small – all cases can be treated identically, including the widespread sensor-based solutions from the...

A hybrid model for multipoint real time potency observation in continuous direct compression manufacturing operations

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Gallo-Molina, Juan Pablo, Cogoni, Giuseppe, Peeters, Elisabeth, Rao Ambati, Seshagiri, Nopens, Ingmar

The ongoing transition from batch to continuous manufacturing offers both challenges and opportunities in the field of oral solid dosage form production. In turn, Process Analytical Technology (PAT) offers a path towards the successful deployment of continuous tablet manufacturing in rotary...

A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza

Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...

A PAT-based qualification of pharmaceutical excipients produced by batch or continuous processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Hertrampf A., Müller H., Menezes J.C., Herdling T.

Pharmaceutical excipients have an influence on the main requirements for medicinal products (viz., quality, safety and efficacy) but also on their manufacturability. During product lifecycle it may become necessary to introduce minor changes (e.g., to continuously improve it) or major changes in...

A Perspective on Quality by Design: A Preclinical Opportunity

28 Mar 2024 | Document | Contributor(s): Ajaz S. Hussain

A review of emerging technologies enabling improved solid oral dosage form manufacturing and processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sohail Arshad, Muhammad, Zafar, Saman, Yousef, Bushra, Alyassin, Yasmine, Ali, Radeyah, AlAsiri, Ali, Chang, Ming-Wei, Ahmad, Zeeshan, Ali Elkordy, Amal, Faheem, Ahmed, Pitt, Kendal

Tablets are the most widely utilized solid oral dosage forms because of the advantages of self-administration, stability, ease of handling, transportation, and good patient compliance. Over time, extensive advances have been made in tableting technology. This review aims to provide an insight...

A review of PAT strategies in secondary solid oral dosage manufacturing of small molecules

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Laske, Stephan, Paudel, Amrit, Scheibelhofer, Otto, Sacher, Stephan, Hoermann, Theresa, Khinast, Johannes, Kelly, Adrian, Rantannen, Jukka, Korhonen, Ossi, Stauffer, Fanny, De Leersnyder, Fien, De Beer, Thomas, Mantanus, Jerome, Chavez, Pierre-Francois, Thoorens, Benjamin, Ghiotti, Patrizia, Schubert, Martin, Tajarobi, Pirjo, Haeffler, Gunnar, Lakio, Satu, Fransson, Magnus, Sparen, Anders, Abrahmsen-Alami, Susanna, Folestad, Staffan, Funke, Adrian, Backx, Ivo, Kavsek, Barbara, Kjell, Francois, Michaelis, Marc, Page, Trevor, Palmer, John, Schaepman, Alexander, Sekulic, Sonja, Hammond, Steve, Braun, Birgit, Colegrove, Brenda

Pharmaceutical solid oral dosage product manufacturing is a well-established, yet revolutionizing area. To this end, process analytical technology (PAT) involves interdisciplinary and multivariate (chemical, physical, microbiological and mathematical) methods for material (e.g. materials,...

A Review of Process Analytical Technology (PAT) in the U.S. Pharmaceutical Industry

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Munson, James, Stanfield, C. Freeman, Gujral, Bir

Process Analytical Technologies (PAT) are used to provide timely analysis of critical quality parameters with the end goal of improving final product quality as well as reducing manufacturing costs, thereby significantly benefiting the Pharmaceutical Industry. PAT involves mostly on-line or...

A sampling system for flowing powders based on the theory of sampling

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Alvarado-Hernández, Bárbara B, Sierra-Vega, Nobel O, Martínez-Cartagena, Pedro, Hormaza, Manuel, Méndez, Rafael, Romañach, Rodolfo J.

An innovative chute and stream sampler system for flowing powders has been developed and tested. The system is designed for representative sampling based on the principles of the Theory of Sampling (TOS). The sampling system was used in combination with near infrared (NIR) spectroscopy to...

A Semi-Continuous Operations Model For Solid-Dose Manufacturing

09 Jun 2023 | Magazine | Contributor(s): Pazhayattil, Ajay Babu, Sayeed-Desta, Naheed

This article will explore the evolving generic drug environment in the U.S. It will also describe an operations model for semi-continuous manufacturing of generic solid-dose products that will improve flexibility and enable just-in-time production.

A Shared Vision for Pharmaceutical Development and Manufacturing in the 21st Century: Contributions of the PAT Initiative

28 Mar 2024 | Document | Contributor(s): Ajaz S. Hussain

A Systematic Framework for Data Management and Integration in a Continuous Pharmaceutical Manufacturing Processing Line

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Cao, Huiyi, Mushnoori, Srinivas, Higgins, Barry, Kollipara, Chandrasekhar, Fermier, Adam, Hausner, Douglas, Jha, Shantenu, Singh, Ravendra, Ierapetritou, Marianthi, Ramachandran, Rohit

As the pharmaceutical industry seeks more efficient methods for the production of higher value therapeutics, the associated data analysis, data visualization, and predictive modeling require dependable data origination, management, transfer, and integration. As a result, the management and...

A systematic framework for onsite design and implementation of a control system in a continuous tablet manufacturing process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Singh, Ravendra, Sahay, Abhishek Muzzio, Fernando Ierapetritou, Marianthi, Ramachandran, Rohit

A novel manufacturing strategy based on continuous processing integrated with online/inline monitoring tools coupled with an advanced control system is highly desired for efficient Quality by Design (QbD)-based pharmaceutical manufacturing. A control system ensures the predefined end product...

A Systematic Framework for Process Control Design and Risk Analysis in Continuous Pharmaceutical Solid-Dosage Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Su, Qinglin, Moreno, Mariana, Giridhar, Arun, Reklaitis, Gintaras, Nagy, Zoltan

The paradigm shift in the pharmaceutical industry to continuous manufacturing, which has recently progressed from conceptual demonstration to pilot production, has stimulated the development and application of process systems engineering (PSE) tools for implementing efficient and robust control...

A systematic framework to monitor mulling processes using Near Infrared spectroscopy

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Wu, Suyang, Panikar, Savitha S Singh, Ravendra Zhang, Jun Glasser, Benjamin, Ramachandran, Rohit

The optimal design of sensor location and setup is essential to ensure the accuracy and precision of in-line process monitoring of water/moisture content. This manuscript presents a systematic framework of using Near Infrared (NIR) spectroscopy to monitor moisture content in an alumina mulling...

A very boring 120 h: 15million tablets under a continuous state of control

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Holman, James, Tantuccio, Anthony, Palmera, Jhon, Doninck, Tom van, Meyer, Robert

The aimof this study is to showthe robustness of a commercial direct compression system running continuously under relevant process conditions for over 120 h. The study will apply a representative commercial control strategy including real time monitoring of process parameters, rejection of OOS...

A Virtual Plant for Integrated Continuous Manufacturing of a Carfilzomib Drug Substance Intermediate, Part 1: CDI-Promoted Amide Bond Formation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Içten, Elçin, Maloney, Andrew J., Beaver, Matthew G., Shen, Dongying E., Zhu, Xiaoxiang, Graham, Lauren R., Robinson, Jo A., Huggins, Seth, Allian, Ayman, Hart, Roger, Walker,Shawn D., Rolandi, Pablo, Braatz, Richard D.

This article details process characterization efforts and the development of corresponding process models to inform a process control strategy to produce a carfilzomib drug substance intermediate, morpholine amide 3. Model calibration for relevant unit operations and development of a dynamic...

Achieving Continuous Manufacturing for Final Dosage Formation: Challenges and How to Meet Them

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Byrn, Stephen, Futran, Maricio, Thomas, Hayden, Jayjock, Eric, Maron, Nicola, Meyer, Robert F., Myerson, Allan S., Thien, Michael P., Trout, Bernhardt L.

We describe the key issues and possibilities for continuous final dosage formation, otherwise known as downstream processing or drug product manufacturing. A distinction is made between heterogeneous processing and homogeneous processing, the latter of which is expected to add more value to...

Achieving Continuous Manufacturing: Technologies and Approaches for Synthesis, Workup, and Isolation of Drug Substance May 20-21, 2014 Continuous Manufacturing Symposium

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Baxendale, IR, Braatz, RDHodnett, BK, Jensen, KF, Johnson, MD, Sharratt, P, Sherlock, JP, Florence, AJ

This whitepaper highlights current challenges and opportunities associated with continuous synthesis, workup, and crystallization of active pharmaceutical ingredients (drug substances). We describe the technologies and requirements at each stage and emphasize the different considerations for...

Adequacy and Verifiability of Pharmaceutical Mixtures and Dose Units by Variographic Analysis (Theory of Sampling) - A Call for a Regulatory Paradigm Shift

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Esbensen, Kim H, Román-Ospino, Andrés D., Sanchez, Adriluz, Romañach, Rodolfo J.

In spite of intense efforts in the last 20 years, the current state of affairs regarding evaluation of adequacy of pharmaceutical mixing is at an impressive standstill, characterized by two draft guidances, one withdrawn, and the other never approved. We here analyze the regulatory, scientific...