A Compact Device for the Integrated Filtration, Drying, and Mechanical Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Contributor(s): Capellades, G, Neurohr, CAzad, M, Brancazio, D, Rapp, K, Hammersmith, G, Myerson, AS

Recent changes in the pharmaceutical sector call for the development of novel manufacturing approaches to reduce costs and improve control over product quality. In this area, the development of compact, plug-and-play devices that fit in a continuous manufacturing system has gained interest in...

A comparative review of multi-rate moving horizon estimation schemes for bioprocess applications

09 Jun 2023 | Contributor(s): Elsheikh, Mohamed, Hille, Rubin Tatulea-Codrean, Alexandru, Kramer, Stefan

Advanced control and monitoring of bioprocesses are dependent on accurate state and parameter information. At the same time, bioprocesses are well known for their time-varying behavior and difficulty of obtaining online measurements of the important process states. The selection and the tuning of...

A Continuous Operation Concept for a Rotary Tablet Press Using Mass Flow Operating Points

09 Jun 2023 | Contributor(s): Martinetz, Michael Christian, Rehrl, Jakob Aigner, Isabella Sacher, Stephan, Khinast, Johannes

Abstract In a continuous pharmaceutical manufacturing line the rotary tablet press was viewed as the master of control concept and defined the mass flow through the entire process. According to a conventional control concept, missing mass flow from an upstream unit operation leads to a shutdown...

A fast moving horizon estimation algorithm based on nonlinear programming sensitivity

09 Jun 2023 | Contributor(s): Zavala, Victor M, Laird, Carl D, Biegler, Lorenz T

Moving horizon estimation (MHE) is an efficient optimization-based strategy for state estimation. Despite the attractiveness of this method, its application in industrial settings has been rather limited. This has been mainly due to the difficulty to solve, in real-time, the associated dynamic...

A Hybrid MPC-PID Control System Design for the Continuous Purification and Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Contributor(s): Sen, M, Singh, R, Ramachandran, R

In this work, a hybrid MPC (model predictive control)-PID (proportional-integral-derivative) control system has been designed for the continuous purification and processing framework of active pharmaceutical ingredients (APIs). The specific unit operations associated with the purification and...

A hybrid neural network-first principles approach to process modeling

09 Jun 2023 | Contributor(s): Psichogios, Dimitris C., Ungar, Lyle H.

A hybrid neural network‐first principles modeling scheme is developed and used to model a fedbatch bioreactor. The hybrid model combines a partial first principles model, which incorporates the available prior knowledge about the process being modeled, with a neural network which...

A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations

09 Jun 2023 | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza

Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...

A modeling and control framework for extraction processes

05 Sep 2024 | Peer-reviewed journal | Contributor(s): Peter Neugebauer, Jakob Rehrl, Peter Poechlauer, Dirk Kirschneck, Martin Horn, Martin Steinberger, Stephan Sacher, Joscha Boehm, Daniel Moser

Many continuously operated pharmaceutical process routes have been presented recently. Most of these cover the synthesis of the active pharmaceutical ingredient (API) or solid dosage processing. However, the API purification is also gaining attraction. One widespread and waste-intensive unit...

A Moving Horizon Estimator for processes with multi-rate measurements: A Nonlinear Programming sensitivity approach

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Lopez-Negrete, Rodrigo, Biegler, Lorenz T.

Moving Horizon Estimation (MHE) provides a framework that allows one to incorporate both frequent and infrequent observations easily because it uses a window of past measurements, where the slower ones can be introduced as they become available. Also, MHE allows for the use of constraints on the...

A Moving Horizon-Based Approach for Least-Squares Estimation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Robertson, Douglas G., Lee, Jay H., Rawlings, James B.

A general formulation of the moving horizon estimator is presented. An algorithm with a fixed-size estimation window and constraints on states, disturbances, and measurement noise is developed, and a probabilistic interpretation is given. The moving horizon formulation requires only one more...

A novel robust digital design of a network of industrial continuous cooling crystallizers of dextrose monohydrate: From laboratory experiments to industrial application

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Nagy, Zoltan K., Szilagyi, Botond Pal, Kanjakha, Tabar, Iman Beheshti ;

This paper presents the first-ever industrial application of the digital design of a complex, large-scale industrial continuous crystallization network. The aim of the work is to optimize a large-scale continuous crystallization network used for the purification of dextrose monohydrate, by...

A perspective on Quality-by-Control (QbC) in pharmaceutical continuous manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Su, Qinglin, Ganesh, Sudarshan Moreno, Mariana Bommireddy, Yasasvi, Gonzalez, Marcial, Reklaitis, Gintaras V., Nagy, Zoltan K.

The Quality-by-Design (QbD) guidance issued by the US Food and Drug Administration (FDA) has catalyzed the modernization of pharmaceutical manufacturing practices including the adoption of continuous manufacturing. Active process control was highlighted recently as a means to improve the QbD...

A perspective on Quality-by-Control (QbC) in pharmaceutical continuous manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Su, Qinglin, Ganesh, Sudarshan Moreno, Mariana Bommireddy, Yasasvi, Gonzalez, Marcial, Reklaitis, Gintaras V., Nagy, Zoltan K.

The Quality-by-Design (QbD) guidance issued by the US Food and Drug Administration (FDA) has catalyzed the modernization of pharmaceutical manufacturing practices including the adoption of continuous manufacturing. Active process control was highlighted recently as a means to improve the QbD...

A review of emerging technologies enabling improved solid oral dosage form manufacturing and processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sohail Arshad, Muhammad, Zafar, Saman, Yousef, Bushra, Alyassin, Yasmine, Ali, Radeyah, AlAsiri, Ali, Chang, Ming-Wei, Ahmad, Zeeshan, Ali Elkordy, Amal, Faheem, Ahmed, Pitt, Kendal

Tablets are the most widely utilized solid oral dosage forms because of the advantages of self-administration, stability, ease of handling, transportation, and good patient compliance. Over time, extensive advances have been made in tableting technology. This review aims to provide an insight...

A systematic framework for onsite design and implementation of a control system in a continuous tablet manufacturing process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Singh, Ravendra, Sahay, Abhishek Muzzio, Fernando Ierapetritou, Marianthi, Ramachandran, Rohit

A novel manufacturing strategy based on continuous processing integrated with online/inline monitoring tools coupled with an advanced control system is highly desired for efficient Quality by Design (QbD)-based pharmaceutical manufacturing. A control system ensures the predefined end product...

A Systematic Framework for Process Control Design and Risk Analysis in Continuous Pharmaceutical Solid-Dosage Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Su, Qinglin, Moreno, Mariana, Giridhar, Arun, Reklaitis, Gintaras, Nagy, Zoltan

The paradigm shift in the pharmaceutical industry to continuous manufacturing, which has recently progressed from conceptual demonstration to pilot production, has stimulated the development and application of process systems engineering (PSE) tools for implementing efficient and robust control...

A Systematic Framework for Process Control Design and Risk Analysis in Continuous Pharmaceutical Solid-Dosage Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Su, Qinglin, Moreno, Mariana, Giridhar, Arun, Reklaitis, Gintaras, Nagy, Zoltan

The paradigm shift in the pharmaceutical industry to continuous manufacturing, which has recently progressed from conceptual demonstration to pilot production, has stimulated the development and application of process systems engineering (PSE) tools for implementing efficient and robust control...

A Systematic Framework for the Design and Implementation of Sensing and Control Architecture for a Continuous Pharmaceutical Manufacturing Plant

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Singh, Ravendra, Muzzio, Fernando J Ierapetritou, Marianthi, Ramachnadran, Rohit

The continuous pharmaceutical manufacture (CPM) plant and control architecture developed earlier is currently being widely implemented in industries [1,2]. CPM indeed provides an appropriate platform to implement suitable monitoring and control architecture, to improve product quality, and to...

A Virtual Plant for Integrated Continuous Manufacturing of a Carfilzomib Drug Substance Intermediate, Part 1: CDI-Promoted Amide Bond Formation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Içten, Elçin, Maloney, Andrew J., Beaver, Matthew G., Shen, Dongying E., Zhu, Xiaoxiang, Graham, Lauren R., Robinson, Jo A., Huggins, Seth, Allian, Ayman, Hart, Roger, Walker,Shawn D., Rolandi, Pablo, Braatz, Richard D.

This article details process characterization efforts and the development of corresponding process models to inform a process control strategy to produce a carfilzomib drug substance intermediate, morpholine amide 3. Model calibration for relevant unit operations and development of a dynamic...

A Virtual Plant for Integrated Continuous Manufacturing of a Carfilzomib Drug Substance Intermediate, Part 1: CDI-Promoted Amide Bond Formation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Içten, Elçin, Maloney, Andrew J., Beaver, Matthew G., Shen, Dongying E., Zhu, Xiaoxiang, Graham, Lauren R., Robinson, Jo A., Huggins, Seth, Allian, Ayman, Hart, Roger, Walker,Shawn D., Rolandi, Pablo, Braatz, Richard D.

This article details process characterization efforts and the development of corresponding process models to inform a process control strategy to produce a carfilzomib drug substance intermediate, morpholine amide 3. Model calibration for relevant unit operations and development of a dynamic...

Advanced Continuous Flow Platform for On-Demand Pharmaceutical Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Zhang, P, Weeranoppanant, NThomas, DA, Tahara, K, Stelzer, T, Russell, MG, O'Mahony, M, Myerson, AS, Lin, HK, Kelly, LP, Jensen, KF, Jamison, TF, Dai, CH, Cui, YQ, Briggs, N, Beingessner, RL, Adamo, A

As a demonstration of an alternative to the challenges faced with batch pharmaceutical manufacturing including the large production footprint and lengthy time-scale, we previously reported a refrigerator-sized continuous flow system for the on-demand production of essential medicines. Building on...

Advanced control of a continuous oscillatory flow crystalliser

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Tahir, F, Krzemieniewska-Nandwani, KMack, J, Lovett, D, Siddique, H, Mabbott, F, Raval, V, Houson, I, Florence, A

This paper presents the application and challenges of achieving Model Predictive Control (MPC) on two continuous oscillatory baffled crystallisation reactors, delivering precise product quality control in the face of raw material fluctuations. A key advantage of MPC is that it effectively deals...

Advanced Real-Time Process Analytics for Multistep Synthesis in Continuous Flow

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sagmeister, Peter, Lebl, René, Castillo, Ismael, Rehrl, Jakob, Kruisz, Julia, Sipek, Martin, Horn, Martin, Sacher, Stephan, Cantillo, David, Williams, Jason D, Kappe, Oliver

In multistep continuous flow chemistry, studying complex reaction mixtures in real time is a significant challenge, but provides an opportunity to enhance reaction understanding and control. We report the integration of four complementary process analytical technology tools (NMR, UV/Vis, IR and...

Advances in Twin-Screw Granulation Processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Nandi, Uttom, Trivedi, Vivek, Ross, Steven A., Douroumis, Dennis

Twin-screw granulation (TSG) is a pharmaceutical process that has gained increased interest from the pharmaceutical industry for its potential for the development of oral dosage forms. The technology has evolved rapidly due to the flexibility of the equipment design, the selection of the process...

An agile and robust in-line NIR potency deviation detection method for monitoring and control of a continuous direct compression process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Alam, Md Anik, Liu, Yang Angela

Near Infrared (NIR) method for blend potency estimation has been commonly used as an essential tool for process monitoring and control in continuous manufacturing of solid oral dosage forms. Robustness has been the main challenge for successful application of an NIR method, which often results in...