A Combined Feed-Forward/Feed-Back Control System for a QbD-Based Continuous Tablet Manufacturing Process

09 Jun 2023 | Contributor(s): Singh, Ravendra, Muzzio, Fernando J, Ierapetritou, Marianthi, Ramachandran, Rohit

Continuous pharmaceutical manufacturing together with PAT (Process Analytical Technology) provides a suitable platform for automatic control of the end product quality as desired by QbD (quality by design)-based efficient manufacturing. The precise control of the quality of the pharmaceutical...

A comparative review of multi-rate moving horizon estimation schemes for bioprocess applications

09 Jun 2023 | Contributor(s): Elsheikh, Mohamed, Hille, Rubin Tatulea-Codrean, Alexandru, Kramer, Stefan

Advanced control and monitoring of bioprocesses are dependent on accurate state and parameter information. At the same time, bioprocesses are well known for their time-varying behavior and difficulty of obtaining online measurements of the important process states. The selection and the tuning of...

A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine

25 Jun 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler

We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...

A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine

23 Jul 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler

We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...

A Continuous Operation Concept for a Rotary Tablet Press Using Mass Flow Operating Points

09 Jun 2023 | Contributor(s): Martinetz, Michael Christian, Rehrl, Jakob Aigner, Isabella Sacher, Stephan, Khinast, Johannes

Abstract In a continuous pharmaceutical manufacturing line the rotary tablet press was viewed as the master of control concept and defined the mass flow through the entire process. According to a conventional control concept, missing mass flow from an upstream unit operation leads to a shutdown...

A fast moving horizon estimation algorithm based on nonlinear programming sensitivity

09 Jun 2023 | Contributor(s): Zavala, Victor M, Laird, Carl D, Biegler, Lorenz T

Moving horizon estimation (MHE) is an efficient optimization-based strategy for state estimation. Despite the attractiveness of this method, its application in industrial settings has been rather limited. This has been mainly due to the difficulty to solve, in real-time, the associated dynamic...

A Hybrid MPC-PID Control System Design for the Continuous Purification and Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Contributor(s): Sen, M, Singh, R, Ramachandran, R

In this work, a hybrid MPC (model predictive control)-PID (proportional-integral-derivative) control system has been designed for the continuous purification and processing framework of active pharmaceutical ingredients (APIs). The specific unit operations associated with the purification and...

A hybrid neural network-first principles approach to process modeling

09 Jun 2023 | Contributor(s): Psichogios, Dimitris C., Ungar, Lyle H.

A hybrid neural network‐first principles modeling scheme is developed and used to model a fedbatch bioreactor. The hybrid model combines a partial first principles model, which incorporates the available prior knowledge about the process being modeled, with a neural network which...

A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations

09 Jun 2023 | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza

Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...

A large-scale experimental comparison of batch and continuous technologies in pharmaceutical tablet manufacturing using ethenzamide

09 Jun 2023 | Contributor(s): Matsunami, Kensaku, Nagato, Takuya, Hasegawa, Koji, Sugiyama, Hirokazu

This paper compares batch and continuous technologies in terms of product quality and process performance in pharmaceutical tablet manufacturing using ethenzamide as the active pharmaceutical ingredient. Batch and continuous processes using wet granulation were investigated by performing...

A model-based framework for design and analysis of PAT systems

09 Jun 2023 | Workshop | Contributor(s): Gani, Rafiqul, Singh, Ravendra, Gernaey, Krist

A Moving Horizon Estimator for processes with multi-rate measurements: A Nonlinear Programming sensitivity approach

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Lopez-Negrete, Rodrigo, Biegler, Lorenz T.

Moving Horizon Estimation (MHE) provides a framework that allows one to incorporate both frequent and infrequent observations easily because it uses a window of past measurements, where the slower ones can be introduced as they become available. Also, MHE allows for the use of constraints on the...

A Moving Horizon-Based Approach for Least-Squares Estimation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Robertson, Douglas G., Lee, Jay H., Rawlings, James B.

A general formulation of the moving horizon estimator is presented. An algorithm with a fixed-size estimation window and constraints on states, disturbances, and measurement noise is developed, and a probabilistic interpretation is given. The moving horizon formulation requires only one more...

A multi-scale hybrid CFD-DEM-PBM description of a fluid-bed granulation process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sen, Maitraye, Barrasso, Dana Singh, Ravendra, Ramachandran, Rohit

In this study, a hybrid multi-scale model has been developed for a continuous fluid bed wet granulation process by dynamically coupling computational fluid dynamics (CFD) with a discrete element model (DEM) and population balance model (PBM). In this process, the granules are formed by spraying...

A novel robust digital design of a network of industrial continuous cooling crystallizers of dextrose monohydrate: From laboratory experiments to industrial application

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Nagy, Zoltan K., Szilagyi, Botond Pal, Kanjakha, Tabar, Iman Beheshti ;

This paper presents the first-ever industrial application of the digital design of a complex, large-scale industrial continuous crystallization network. The aim of the work is to optimize a large-scale continuous crystallization network used for the purification of dextrose monohydrate, by...

A PAT-based qualification of pharmaceutical excipients produced by batch or continuous processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Hertrampf A., Müller H., Menezes J.C., Herdling T.

Pharmaceutical excipients have an influence on the main requirements for medicinal products (viz., quality, safety and efficacy) but also on their manufacturability. During product lifecycle it may become necessary to introduce minor changes (e.g., to continuously improve it) or major changes in...

A Perspective on Quality by Design: A Preclinical Opportunity

28 Mar 2024 | Document | Contributor(s): Ajaz S. Hussain

A perspective on Quality-by-Control (QbC) in pharmaceutical continuous manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Su, Qinglin, Ganesh, Sudarshan Moreno, Mariana Bommireddy, Yasasvi, Gonzalez, Marcial, Reklaitis, Gintaras V., Nagy, Zoltan K.

The Quality-by-Design (QbD) guidance issued by the US Food and Drug Administration (FDA) has catalyzed the modernization of pharmaceutical manufacturing practices including the adoption of continuous manufacturing. Active process control was highlighted recently as a means to improve the QbD...

A retrofit strategy to achieve “Fast, Flexible, Future (F3)” pharmaceutical production processes

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Singh, Ravendra, Rozada-Sanchez, Raquel Wrate, Tim Muller, Frans Gernaey, Krist V Gani, Rafiqul, Woodley, John M

n the work reported here, a substrates adoption methodology for a series of similar substrates has been developed as part of a retrofit strategy. The objective is to achieve “fast, flexible and future” pharmaceutical production processes by adapting a generic modular process-plant template....

A review of emerging technologies enabling improved solid oral dosage form manufacturing and processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sohail Arshad, Muhammad, Zafar, Saman, Yousef, Bushra, Alyassin, Yasmine, Ali, Radeyah, AlAsiri, Ali, Chang, Ming-Wei, Ahmad, Zeeshan, Ali Elkordy, Amal, Faheem, Ahmed, Pitt, Kendal

Tablets are the most widely utilized solid oral dosage forms because of the advantages of self-administration, stability, ease of handling, transportation, and good patient compliance. Over time, extensive advances have been made in tableting technology. This review aims to provide an insight...

A review of PAT strategies in secondary solid oral dosage manufacturing of small molecules

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Laske, Stephan, Paudel, Amrit, Scheibelhofer, Otto, Sacher, Stephan, Hoermann, Theresa, Khinast, Johannes, Kelly, Adrian, Rantannen, Jukka, Korhonen, Ossi, Stauffer, Fanny, De Leersnyder, Fien, De Beer, Thomas, Mantanus, Jerome, Chavez, Pierre-Francois, Thoorens, Benjamin, Ghiotti, Patrizia, Schubert, Martin, Tajarobi, Pirjo, Haeffler, Gunnar, Lakio, Satu, Fransson, Magnus, Sparen, Anders, Abrahmsen-Alami, Susanna, Folestad, Staffan, Funke, Adrian, Backx, Ivo, Kavsek, Barbara, Kjell, Francois, Michaelis, Marc, Page, Trevor, Palmer, John, Schaepman, Alexander, Sekulic, Sonja, Hammond, Steve, Braun, Birgit, Colegrove, Brenda

Pharmaceutical solid oral dosage product manufacturing is a well-established, yet revolutionizing area. To this end, process analytical technology (PAT) involves interdisciplinary and multivariate (chemical, physical, microbiological and mathematical) methods for material (e.g. materials,...

A Scalable Two-Step Continuous Flow Synthesis of Nabumetone and Related 4-Aryl-2-butanones

24 Apr 2024 | Peer-reviewed journal | Contributor(s): Viviano, Monica, Glasnov, Toma N., Reichart, Benedik, Tekautz, Guenter, Kappe, C. Oliver

Three different continuous flow strategies for the generation of important 4-aryl-2-butanone derivatives including the anti-inflammatory drug nabumetone [4-(6-methoxy-2-naphthalenyl)-2-butanone] and the aroma compounds raspberry ketone [4-(4-hydroxyphenyl)-2-butanone] and its methyl ether...

A Shared Vision for Pharmaceutical Development and Manufacturing in the 21st Century: Contributions of the PAT Initiative

28 Mar 2024 | Document | Contributor(s): Ajaz S. Hussain

A systematic computer aided framework for design and analysis of PAT systems

09 Jun 2023 | Workshop | Contributor(s): Gernaey, Krist, Singh, Ravendra, Gani, Rafiqul

Not available

A systematic framework for onsite design and implementation of a control system in a continuous tablet manufacturing process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Singh, Ravendra, Sahay, Abhishek Muzzio, Fernando Ierapetritou, Marianthi, Ramachandran, Rohit

A novel manufacturing strategy based on continuous processing integrated with online/inline monitoring tools coupled with an advanced control system is highly desired for efficient Quality by Design (QbD)-based pharmaceutical manufacturing. A control system ensures the predefined end product...