Skip to main content
Join CMKC members for a complimentary virtual event on December 10, 11am ET: CM MythBusters: https://bit.ly/3YXJynA. This is a fantastic opportunity to connect, collaborate, and debunk common myths about continuous manufacturing!
18.191.200.223

Tags: lubricant

All Categories (1-3 of 3)

  1. Development of a novel method for the continuous blending of carrier-based dry powders for inhalation using a co-rotating twin-screw extruder

    23 Jul 2024 | Contributor(s):: Spahn, Jamie E., Hefnawy, Amr, Smyth, Hugh D. C., Zhang, Feng

    Twin-screw extruders are useful in tuning certain product characteristics due to the ability to greatly modify screw profiles as well as operating parameters. However, their use has not yet been applied to dry powder inhalation. In this study the feasibility of using a twin-screw extruder to...

  2. Tableting model assessment of porosity and tensile strength using a continuous wet granulation route

    09 Jun 2023 | Contributor(s):: Wang, Li Ge, Omar, Chalak, Li, Jianfeng, Mitchell, Niall, Bellinghausen, Stefan, Barrasso, Dana, Salman, Agba, Slade, David

    This paper presents a comprehensive assessment of the most widely used tablet compaction models in a continuous wet granulation tableting process. The porosity models, tensile strength models and lubricant models are reviewed from the literature and classified based on their formulations i.e....

  3. Application of the quantitative detection of a change in concentration of magnesium stearate in a feeder tube of tableting manufacture by real-time near-infrared spectroscopy

    09 Jun 2023 | Contributor(s):: Sasakura, D., Nakayama, K., Chikuma, T.

    Process analytical technology is important for the analysis and control of manufacturing processes. Near-infrared spectroscopy is widely used in various process analytical technologies for the analysis of the chemical components of solid dosage forms. Lubrication is an important process carried...