Skip to main content
Join CMKC members for a complimentary virtual event on December 10, 11am ET: CM MythBusters: https://bit.ly/3YXJynA. This is a fantastic opportunity to connect, collaborate, and debunk common myths about continuous manufacturing!
3.149.25.109

Batch vs. continuous direct compression – a comparison of material processability and final tablet quality

By S. Fathollahi1; D. Vanderroost2; T. Roelofs1; B.H.J. Dickhoff1; C. Vervaet3; V. Vanhoorne3; B. Bekaert3; P.H.M. Janssen4

1. DFE Pharma, Klever Strasse 187, 47568 Goch, Germany 2. GEA Process Engineering, Keerbaan 70, B-2160 Wommelgem, Belgium 3. Laboratory of Pharmaceutical Technology, Department of Pharmaceutics, Ghent University, Ottergemsesteenweg 460, B-9000 Ghent, Belgium 4. Department of Pharmaceutical Technology and Biopharmacy, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, the Netherlands & DFE Pharma, Klever Strasse 187, 47568 Goch, Germany

Published on

Abstract

In this study, an in-depth comparison was made between batch and continuous direct compression using similar compression set-ups. The overall material processability and final tablet quality were compared and evaluated. Correlations between material properties, process parameters and final tablet properties were made via multivariate data analyses. In total, 10 low-dosed (1% w/w) and 10 high-dosed (40% w/w) formulations were processed, using a total of 10 different fillers/filler combinations. The trials indicated that the impact of filler type, drug load or process settings was similar for batch and continuous direct compression. The main differentiator between batch and continuous was the flow dynamics in the operating system, where properties related to flow, compressibility and permeability played a crucial role. The less consistent flow throughout a batch process resulted in a significantly higher variability within the tablet press (σCF) and for the tablet quality responses (σMass, σTS). However, the better controlled blending procedure prior to batch processing was reflected in a more consistent API concentration variability. Overall, the comparison showed the benefits of selecting appropriate excipients and process settings to achieve a specific outcome, keeping in mind some key differentiators between both processes.

Journal

International Journal of Pharmaceutics: X, Vol. 7

DOI

10.1016/j.ijpx.2023.100226

Type of publication

Open Access Journal

Affiliations

  • Laboratory of Pharmaceutical Technology, Department of Pharmaceutics, Ghent University, Ottergemsesteenweg 460, B-9000 Ghent, Belgium
  • Department of Pharmaceutical Technology and Biopharmacy, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, the Netherlands
  • DFE Pharma, Klever Strasse 187, 47568 Goch, Germany
  • GEA Process Engineering, Keerbaan 70, B-2160 Wommelgem, Belgium

Article Classification

Peer-Reviewed Journal

Tags