A comparative review of multi-rate moving horizon estimation schemes for bioprocess applications

09 Jun 2023 | Contributor(s): Elsheikh, Mohamed, Hille, Rubin Tatulea-Codrean, Alexandru, Kramer, Stefan

Advanced control and monitoring of bioprocesses are dependent on accurate state and parameter information. At the same time, bioprocesses are well known for their time-varying behavior and difficulty of obtaining online measurements of the important process states. The selection and the tuning of...

A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine

25 Jun 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler

We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...

A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine

23 Jul 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler

We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...

A Continuous Operation Concept for a Rotary Tablet Press Using Mass Flow Operating Points

09 Jun 2023 | Contributor(s): Martinetz, Michael Christian, Rehrl, Jakob Aigner, Isabella Sacher, Stephan, Khinast, Johannes

Abstract In a continuous pharmaceutical manufacturing line the rotary tablet press was viewed as the master of control concept and defined the mass flow through the entire process. According to a conventional control concept, missing mass flow from an upstream unit operation leads to a shutdown...

A fast moving horizon estimation algorithm based on nonlinear programming sensitivity

09 Jun 2023 | Contributor(s): Zavala, Victor M, Laird, Carl D, Biegler, Lorenz T

Moving horizon estimation (MHE) is an efficient optimization-based strategy for state estimation. Despite the attractiveness of this method, its application in industrial settings has been rather limited. This has been mainly due to the difficulty to solve, in real-time, the associated dynamic...

A hybrid neural network-first principles approach to process modeling

09 Jun 2023 | Contributor(s): Psichogios, Dimitris C., Ungar, Lyle H.

A hybrid neural network‐first principles modeling scheme is developed and used to model a fedbatch bioreactor. The hybrid model combines a partial first principles model, which incorporates the available prior knowledge about the process being modeled, with a neural network which...

A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations

09 Jun 2023 | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza

Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...

A large-scale experimental comparison of batch and continuous technologies in pharmaceutical tablet manufacturing using ethenzamide

09 Jun 2023 | Contributor(s): Matsunami, Kensaku, Nagato, Takuya, Hasegawa, Koji, Sugiyama, Hirokazu

This paper compares batch and continuous technologies in terms of product quality and process performance in pharmaceutical tablet manufacturing using ethenzamide as the active pharmaceutical ingredient. Batch and continuous processes using wet granulation were investigated by performing...

A Moving Horizon Estimator for processes with multi-rate measurements: A Nonlinear Programming sensitivity approach

09 Jun 2023 | Contributor(s): Lopez-Negrete, Rodrigo, Biegler, Lorenz T.

Moving Horizon Estimation (MHE) provides a framework that allows one to incorporate both frequent and infrequent observations easily because it uses a window of past measurements, where the slower ones can be introduced as they become available. Also, MHE allows for the use of constraints on the...

A Moving Horizon-Based Approach for Least-Squares Estimation

09 Jun 2023 | Contributor(s): Robertson, Douglas G., Lee, Jay H., Rawlings, James B.

A general formulation of the moving horizon estimator is presented. An algorithm with a fixed-size estimation window and constraints on states, disturbances, and measurement noise is developed, and a probabilistic interpretation is given. The moving horizon formulation requires only one more...

A novel robust digital design of a network of industrial continuous cooling crystallizers of dextrose monohydrate: From laboratory experiments to industrial application

09 Jun 2023 | Contributor(s): Nagy, Zoltan K., Szilagyi, Botond Pal, Kanjakha, Tabar, Iman Beheshti ;

This paper presents the first-ever industrial application of the digital design of a complex, large-scale industrial continuous crystallization network. The aim of the work is to optimize a large-scale continuous crystallization network used for the purification of dextrose monohydrate, by...

A perspective on Quality-by-Control (QbC) in pharmaceutical continuous manufacturing

09 Jun 2023 | Contributor(s): Su, Qinglin, Ganesh, Sudarshan Moreno, Mariana Bommireddy, Yasasvi, Gonzalez, Marcial, Reklaitis, Gintaras V., Nagy, Zoltan K.

The Quality-by-Design (QbD) guidance issued by the US Food and Drug Administration (FDA) has catalyzed the modernization of pharmaceutical manufacturing practices including the adoption of continuous manufacturing. Active process control was highlighted recently as a means to improve the QbD...

A review of emerging technologies enabling improved solid oral dosage form manufacturing and processing

09 Jun 2023 | Contributor(s): Sohail Arshad, Muhammad, Zafar, Saman, Yousef, Bushra, Alyassin, Yasmine, Ali, Radeyah, AlAsiri, Ali, Chang, Ming-Wei, Ahmad, Zeeshan, Ali Elkordy, Amal, Faheem, Ahmed, Pitt, Kendal

Tablets are the most widely utilized solid oral dosage forms because of the advantages of self-administration, stability, ease of handling, transportation, and good patient compliance. Over time, extensive advances have been made in tableting technology. This review aims to provide an insight...

A Scalable Two-Step Continuous Flow Synthesis of Nabumetone and Related 4-Aryl-2-butanones

24 Apr 2024 | Contributor(s): Viviano, Monica, Glasnov, Toma N., Reichart, Benedik, Tekautz, Guenter, Kappe, C. Oliver

Three different continuous flow strategies for the generation of important 4-aryl-2-butanone derivatives including the anti-inflammatory drug nabumetone [4-(6-methoxy-2-naphthalenyl)-2-butanone] and the aroma compounds raspberry ketone [4-(4-hydroxyphenyl)-2-butanone] and its methyl ether...

A Systematic Framework for Process Control Design and Risk Analysis in Continuous Pharmaceutical Solid-Dosage Manufacturing

09 Jun 2023 | Contributor(s): Su, Qinglin, Moreno, Mariana, Giridhar, Arun, Reklaitis, Gintaras, Nagy, Zoltan

The paradigm shift in the pharmaceutical industry to continuous manufacturing, which has recently progressed from conceptual demonstration to pilot production, has stimulated the development and application of process systems engineering (PSE) tools for implementing efficient and robust control...

A Systematic Framework for the Design and Implementation of Sensing and Control Architecture for a Continuous Pharmaceutical Manufacturing Plant

09 Jun 2023 | Contributor(s): Singh, Ravendra, Muzzio, Fernando J Ierapetritou, Marianthi, Ramachnadran, Rohit

The continuous pharmaceutical manufacture (CPM) plant and control architecture developed earlier is currently being widely implemented in industries [1,2]. CPM indeed provides an appropriate platform to implement suitable monitoring and control architecture, to improve product quality, and to...

A Three-Minute Synthesis and Purification of Ibuprofen: Pushing the Limits of Continuous-Flow Processing

10 May 2024 | Contributor(s): Snead, David R., Jamison, Timothy F.

In a total residence time of three minutes, ibuprofen was assembled from its elementary building blocks with an average yield of above 90 % for each step. A scale-up of this five-stage process (3 bond-forming steps, one work-up, and one in-line liquid–liquid separation) provided ibuprofen at a...

A Virtual Plant for Integrated Continuous Manufacturing of a Carfilzomib Drug Substance Intermediate, Part 1: CDI-Promoted Amide Bond Formation

09 Jun 2023 | Contributor(s): Içten, Elçin, Maloney, Andrew J., Beaver, Matthew G., Shen, Dongying E., Zhu, Xiaoxiang, Graham, Lauren R., Robinson, Jo A., Huggins, Seth, Allian, Ayman, Hart, Roger, Walker,Shawn D., Rolandi, Pablo, Braatz, Richard D.

This article details process characterization efforts and the development of corresponding process models to inform a process control strategy to produce a carfilzomib drug substance intermediate, morpholine amide 3. Model calibration for relevant unit operations and development of a dynamic...

Advanced Continuous Flow Platform for On-Demand Pharmaceutical Manufacturing

09 Jun 2023 | Contributor(s): Zhang, P, Weeranoppanant, NThomas, DA, Tahara, K, Stelzer, T, Russell, MG, O'Mahony, M, Myerson, AS, Lin, HK, Kelly, LP, Jensen, KF, Jamison, TF, Dai, CH, Cui, YQ, Briggs, N, Beingessner, RL, Adamo, A

As a demonstration of an alternative to the challenges faced with batch pharmaceutical manufacturing including the large production footprint and lengthy time-scale, we previously reported a refrigerator-sized continuous flow system for the on-demand production of essential medicines. Building on...

Advanced control of a continuous oscillatory flow crystalliser

09 Jun 2023 | Contributor(s): Tahir, F, Krzemieniewska-Nandwani, KMack, J, Lovett, D, Siddique, H, Mabbott, F, Raval, V, Houson, I, Florence, A

This paper presents the application and challenges of achieving Model Predictive Control (MPC) on two continuous oscillatory baffled crystallisation reactors, delivering precise product quality control in the face of raw material fluctuations. A key advantage of MPC is that it effectively deals...

Advanced methodologies for cocrystal synthesis

09 Jun 2023 | Contributor(s): Douroumis, D, Ross, SA, Nokhodchi, A

Pharmaceutical cocrystals are multicomponent systems composed of two or more molecules and held together by H-bonding. Currently, cocrystals provide exciting opportunities in the pharmaceutical industry for the development and manufacturing of new medicines by improving poor physical properties...

Advancing Flow Chemistry Portability: A Simplified Approach to Scaling Up Flow Chemistry

25 Jun 2024 | Contributor(s): Lévesque, François, Rogus, Nicholas J., Spencer, Glenn, Grigorov, Plamen, McMullen, Jonathan P., Thaisrivongs, David A., Davies, Ian W., Naber, John R.

We report mixing characterization of five lab-scale and eight production-scale static mixers using a modified fourth Bourne reaction. An efficient inline method relying on UV–vis spectroscopy was developed to streamline analysis of the product distribution. As a result of these studies, we have...

Advancing Flow Chemistry Portability: A Simplified Approach to Scaling Up Flow Chemistry

23 Jul 2024 | Contributor(s): Lévesque, François, Rogus, Nicholas J., Spencer, Glenn, Grigorov, Plamen, McMullen, Jonathan P., Thaisrivongs, David A., Davies, Ian W., Naber, John R.

We report mixing characterization of five lab-scale and eight production-scale static mixers using a modified fourth Bourne reaction. An efficient inline method relying on UV–vis spectroscopy was developed to streamline analysis of the product distribution. As a result of these studies, we have...

An agile and robust in-line NIR potency deviation detection method for monitoring and control of a continuous direct compression process

09 Jun 2023 | Contributor(s): Alam, Md Anik, Liu, Yang Angela

Near Infrared (NIR) method for blend potency estimation has been commonly used as an essential tool for process monitoring and control in continuous manufacturing of solid oral dosage forms. Robustness has been the main challenge for successful application of an NIR method, which often results in...

An engineering study on the enhanced control and operation of continuous manufacturing of pharmaceutical tablets via roller compaction

09 Jun 2023 | Contributor(s): R Singh, M Ierapetritou, R Ramachandran

A novel manufacturing strategy based on continuous processing integrated with online monitoring tools coupled with efficient automatic feedback control system is highly desired for efficient Quality by Design (QbD) based manufacturing ofthe next generation of pharmaceutical products with optimal...