-
100% visual inspection of tablets produced with continuous direct compression and coating
09 Jun 2023 | Contributor(s): Barimani, Shirin, Sibanc, Rok, Tomazevic, Dejan, Meier, Robin, Kleinebudde, Peter
Visual appearance of tablets is an important property for patients. Since the visual appearance is most strongly influenced by the applied coating, this necessitates a high level of process control and homogeneity in the coating process. In recent years, a number of tablet coaters have been...
-
A brief review on Process Analytical Technology (PAT)
09 Jun 2023 | Contributor(s): Mali, Akash, Jagtap, Monali, Karekar, P., Maruska, A
Process analytical technology (PAT) has been defined as a mechanism to design, analyze and control pharmaceutical manufacturing processes through measurement of critical process parameters which affect critical quality attributes. PAT checks the quality of raw material attributes both physically...
-
A Combined Feed-Forward/Feed-Back Control System for a QbD-Based Continuous Tablet Manufacturing Process
09 Jun 2023 | Contributor(s): Singh, Ravendra, Muzzio, Fernando J, Ierapetritou, Marianthi, Ramachandran, Rohit
Continuous pharmaceutical manufacturing together with PAT (Process Analytical Technology) provides a suitable platform for automatic control of the end product quality as desired by QbD (quality by design)-based efficient manufacturing. The precise control of the quality of the pharmaceutical...
-
A comparative review of multi-rate moving horizon estimation schemes for bioprocess applications
09 Jun 2023 | Contributor(s): Elsheikh, Mohamed, Hille, Rubin Tatulea-Codrean, Alexandru, Kramer, Stefan
Advanced control and monitoring of bioprocesses are dependent on accurate state and parameter information. At the same time, bioprocesses are well known for their time-varying behavior and difficulty of obtaining online measurements of the important process states. The selection and the tuning of...
-
A comprehensive overview of extended release oral dosage forms manufactured through hot melt extrusion and its combination with 3D printing
09 Jun 2023 | Contributor(s): Nashed, Nour, Lam, Matthew, Nokhodchi, Ali
Oral dosage formulations are considered to be the most convenient pharmaceutical dosage forms for almost all ages because of their simplicity and non-invasive administration compared to other dosage forms. To improve therapeutic efficacy and avoid frequent daily doses, extending drug release...
-
A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine
25 Jun 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler
We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...
-
A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine
25 Jun 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler
We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...
-
A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine
23 Jul 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler
We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...
-
A Continuous Flow Sulfuryl Chloride-Based Reaction—Synthesis of a Key Intermediate in a New Route toward Emtricitabine and Lamivudine
23 Jul 2024 | Contributor(s): Souza, Juliana M. de, Berton, Mateo, Snead, David R., McQuade, D. Tyler
We demonstrate a continuous two-step sequence in which sulfenyl chloride is formed, trapped by vinyl acetate, and chlorinated further via a Pummerer rearrangement. These reactions produce a key intermediate in our new approach to the oxathiolane core used to prepare the antiretroviral medicines...
-
A Continuous Operation Concept for a Rotary Tablet Press Using Mass Flow Operating Points
09 Jun 2023 | Contributor(s): Martinetz, Michael Christian, Rehrl, Jakob Aigner, Isabella Sacher, Stephan, Khinast, Johannes
Abstract In a continuous pharmaceutical manufacturing line the rotary tablet press was viewed as the master of control concept and defined the mass flow through the entire process. According to a conventional control concept, missing mass flow from an upstream unit operation leads to a shutdown...
-
A Continuous Process for Buchwald–Hartwig Amination at Micro-, Lab-, and Mesoscale Using a Novel Reactor Concept
25 Jun 2024 | Contributor(s): Falß, Sebastian, Tomaiuolo, Giovanna, Perazzo, Antonio, Hodgson, Paul, Yaseneva, Polina, Zakrzewski, Jacek, Guido, Stefano, Lapkin, Alexei, Woodward, Robert, Meadows, Rebecca E.
A continuous Buchwald–Hartwig reaction using the bulky N-heterocyclic carbene (NHC) precatalyst [Pd(IPr*)(cin)Cl] 4 has been developed for the synthesis of a key pharmaceutical intermediate 2. Using microreactor technology, the reaction could be optimized under dilute conditions with low material...
-
A Continuous Process for Buchwald–Hartwig Amination at Micro-, Lab-, and Mesoscale Using a Novel Reactor Concept
23 Jul 2024 | Contributor(s): Falß, Sebastian, Tomaiuolo, Giovanna, Perazzo, Antonio, Hodgson, Paul, Yaseneva, Polina, Zakrzewski, Jacek, Guido, Stefano, Lapkin, Alexei, Woodward, Robert, Meadows, Rebecca E.
A continuous Buchwald–Hartwig reaction using the bulky N-heterocyclic carbene (NHC) precatalyst [Pd(IPr*)(cin)Cl] 4 has been developed for the synthesis of a key pharmaceutical intermediate 2. Using microreactor technology, the reaction could be optimized under dilute conditions with low material...
-
A fast moving horizon estimation algorithm based on nonlinear programming sensitivity
09 Jun 2023 | Contributor(s): Zavala, Victor M, Laird, Carl D, Biegler, Lorenz T
Moving horizon estimation (MHE) is an efficient optimization-based strategy for state estimation. Despite the attractiveness of this method, its application in industrial settings has been rather limited. This has been mainly due to the difficulty to solve, in real-time, the associated dynamic...
-
A Flow Process Built upon a Batch Foundation—Preparation of a Key Amino Alcohol Intermediate via Multistage Continuous Synthesis
25 Jun 2024 | Contributor(s): Lim, John Jin, Arrington, Kenneth, Dunn, Anna L., Leitch, David C., Andrews, Ian, Curtis, Neil R., Hughes, Mark J., Tray, Daniel R., Wade, Charles E., Whiting, Matthew P., Goss, Charles, Liu, Yangmu Chloe, Roesch, Brian M.
This paper describes recent efforts to apply flow technology in the preparation of the key amino alcohol intermediate 3b so as to address manufacturability issues present in the batch process of a PRMT5 inhibitor. The continuous process, one of the first reported pharmaceutical processes to use...
-
A Flow Process Built upon a Batch Foundation—Preparation of a Key Amino Alcohol Intermediate via Multistage Continuous Synthesis
23 Jul 2024 | Contributor(s): Lim, John Jin, Arrington, Kenneth, Dunn, Anna L., Leitch, David C., Andrews, Ian, Curtis, Neil R., Hughes, Mark J., Tray, Daniel R., Wade, Charles E., Whiting, Matthew P., Goss, Charles, Liu, Yangmu Chloe, Roesch, Brian M.
This paper describes recent efforts to apply flow technology in the preparation of the key amino alcohol intermediate 3b so as to address manufacturability issues present in the batch process of a PRMT5 inhibitor. The continuous process, one of the first reported pharmaceutical processes to use...
-
A Focused and Flexible Analytical Strategy is Key to Unlocking the Benefits of Continuous Manufacturing
11 Apr 2024 | Website | Contributor(s): Bikash Chatterjee
Continuous manufacturing processes promise shorter manufacturing cycle times without the need for intermediate storage, sampling testing and release of intermediate process steps, and shorter product release times through the intelligent application of in-line and at-line testing strategies....
-
A Framework for Representative Sampling for NIR Analysis – Theory of Sampling (TOS)
09 Jun 2023 | Chapter Book | Contributor(s): Esbensen, Kim H, Ciurczak, Emil W., Igne, Benoît, Workman, Jr.,Jerome, Burns, Donald A., Romañach, Rodolfo J.
This chapter deals with all critical steps before near-infrared spectroscopy (NIR) analysis, irrespective of whether the total sampling error contribution is large, intermediate, or small – all cases can be treated identically, including the widespread sensor-based solutions from the...
-
A hybrid model for multipoint real time potency observation in continuous direct compression manufacturing operations
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Gallo-Molina, Juan Pablo, Cogoni, Giuseppe, Peeters, Elisabeth, Rao Ambati, Seshagiri, Nopens, Ingmar
The ongoing transition from batch to continuous manufacturing offers both challenges and opportunities in the field of oral solid dosage form production. In turn, Process Analytical Technology (PAT) offers a path towards the successful deployment of continuous tablet manufacturing in rotary...
-
A hybrid neural network-first principles approach to process modeling
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Psichogios, Dimitris C., Ungar, Lyle H.
A hybrid neural networkâ€first principles modeling scheme is developed and used to model a fedbatch bioreactor. The hybrid model combines a partial first principles model, which incorporates the available prior knowledge about the process being modeled, with a neural network which...
-
A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza
Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...
-
A hybrid NIR-soft sensor method for real time in-process control during continuous direct compression manufacturing operations
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Cogoni, Giuseppe, Husain, Anas, Alam, Md Anik, Liu, Yang Angela, Kamyar, Reza
Near Infrared (NIR) spectroscopy is commonly utilized for continuous manufacturing as Process Analytical Technology (PAT) tool. This paper focus on a continuous direct compression manufacturing process, in which an NIR PAT probe is integrated into the tablet press feed frame and into the tablet...
-
A large-scale experimental comparison of batch and continuous technologies in pharmaceutical tablet manufacturing using ethenzamide
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Matsunami, Kensaku, Nagato, Takuya, Hasegawa, Koji, Sugiyama, Hirokazu
This paper compares batch and continuous technologies in terms of product quality and process performance in pharmaceutical tablet manufacturing using ethenzamide as the active pharmaceutical ingredient. Batch and continuous processes using wet granulation were investigated by performing...
-
A Moving Horizon Estimator for processes with multi-rate measurements: A Nonlinear Programming sensitivity approach
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Lopez-Negrete, Rodrigo, Biegler, Lorenz T.
Moving Horizon Estimation (MHE) provides a framework that allows one to incorporate both frequent and infrequent observations easily because it uses a window of past measurements, where the slower ones can be introduced as they become available. Also, MHE allows for the use of constraints on the...
-
A Moving Horizon-Based Approach for Least-Squares Estimation
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Robertson, Douglas G., Lee, Jay H., Rawlings, James B.
A general formulation of the moving horizon estimator is presented. An algorithm with a fixed-size estimation window and constraints on states, disturbances, and measurement noise is developed, and a probabilistic interpretation is given. The moving horizon formulation requires only one more...
-
A novel robust digital design of a network of industrial continuous cooling crystallizers of dextrose monohydrate: From laboratory experiments to industrial application
09 Jun 2023 | Peer-reviewed journal | Contributor(s): Nagy, Zoltan K., Szilagyi, Botond Pal, Kanjakha, Tabar, Iman Beheshti ;
This paper presents the first-ever industrial application of the digital design of a complex, large-scale industrial continuous crystallization network. The aim of the work is to optimize a large-scale continuous crystallization network used for the purification of dextrose monohydrate, by...