Critical review on the role of excipient properties in pharmaceutical powder-to-tablet continuous manufacturing

13 Aug 2024 | Peer-reviewed journal | Contributor(s): Sara Fathollahi, Pauline H. M. Janssen, Bastiaan H. J. Dickhoff, Henderik W. Frijlink

The pharmaceutical industry is gradually changing batch-wise manufacturing processes to continuous manufacturing processes, due to the advantages it has to offer. The final product quality and process efficiency of continuous manufacturing processes is among others impacted by the properties of...

Process intensification of pharmaceutical powder blending at commercial throughputs by utilizing semi-continuous mini-blending

13 Aug 2024 | Peer-reviewed journal | Contributor(s): Maarten Jaspers, Florian Tegel, Timo P. Roelofs, Fabian Starsich, Yunfei Li Song, Bernhard Meir, Richard Elkes, Bastiaan H.J. Dickhoff

Process intensification involves the miniaturization of equipment while retaining process throughput and performance. The pharmaceutical industry can benefit from this approach especially during drug product development, where the availability of active pharmaceutical ingredients (API) is often...

Videometric mass flow control: A new method for real-time measurement and feedback control of powder micro-feeding based on image analysis

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Madarasz, L, Kote, AGyurkes, M, Farkas, A, Hambalko, B, Pataki, H, Fulop, G, Marosi, G, Lengyel, L, Casian, T, Csorba, K, Nagy, ZK

The present paper reports the first monitoring and control of ultra-low dose powder feeding using a camera image-based mass flow measurement system. Caffeine was fed via a single-screw microfeeder as a model active pharmaceutical ingredient (API). The mass, mass flow and sizes of the particles...

Using a material property library to find surrogate materials for pharmaceutical process development

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Escotet-Espinoza, MS, Moghtadernejad, SScicolone, J, Wang, YF, Pereira, G, Schafer, E, Vigh, T, Klingeleers, D, Ierapetritou, M, Muzzio, FJ

Material properties are known to have a significant impact on pharmaceutical manufacturing performance, particularly for solid product processes. Evaluating the performance of a specific material, for example an active pharmaceutical ingredient or excipient, is critical during development stages...

Using residence time distribution in pharmaceutical solid dose manufacturing–A critical review

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Bhalode, Pooja, Tian, Huayu Gupta, Shashwat Razavi, Sonia M Roman-Ospino, Andres Talebian, Shahrzad Singh, Ravendra Scicolone, James V Muzzio, Fernando J, Ierapetritou, Marianthi

While continuous manufacturing (CM) of pharmaceutical solid-based drug products has been shown to be advantageous for improving the product quality and process efficiency in alignment with FDA’s support of the quality-by-design paradigm (Lee, 2015; Ierapetritou et al., 2016; Plumb, 2005; Schaber,...

Using Residence Time Distributions (RTDs) to Address the Traceability of Raw Materials in Continuous Pharmaceutical Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Engisch, William, Muzzio, Fernando

Continuous processing in pharmaceutical manufacturing is a relatively new approach that has generated significant attention. While it has been used for decades in other industries, showing significant advantages, the pharmaceutical industry has been slow in its adoption of continuous processing,...

The synthesis of active pharmaceutical ingredients (APIs) using continuous flow chemistry

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Baumann, M, Baxendale, IR

The implementation of continuous flow processing as a key enabling technology has transformed the way we conduct chemistry and has expanded our synthetic capabilities. As a result many new preparative routes have been designed towards commercially relevant drug compounds achieving more efficient...

The Use of PAT and Off-line Methods for Monitoring of Roller Compacted Ribbon and Granule Properties with a View to Continuous Processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): McAuliffe M.A.P., Omahony G.E., Blackshields C.A., Collins J.A., Egan D.P., Kiernan L., Oneill E., Lenihan S., Walker G.M., Crean A.M.

Real-time process monitoring using process analytical technology (PAT) tools can augment process understanding, enable improved process control, and hence facilitate the production of high-quality pharmaceutical products. While beneficial for batch processes, the availability of PAT tools to...

Small-Volume Continuous Manufacturing of Merestinib. Part 1. Process Development and Demonstration

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Cole, KP, Reizman, BJHess, M, Groh, JM, Laurila, ME, Cope, RF, Campbell, BM, Forst, MB, Burt, JL, Maloney, TD, Johnson, MD, Mitchell, D, Polster, CS, Mitra, AW, Boukerche, M, Conder, EW, Braden, TM, Miller, RD, Heller, MR, Phillips, JL, Howell, JR

Development of a small volume continuous process that used a combination of batch and flow unit operations to manufacture the small molecule oncolytic candidate merestinib is described. Continuous processing was enabled following the identification and development of suitable chemical...

Small-Volume Continuous Manufacturing of Merestinib. Part 2.Technology Transfer and cGMP Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Reizman, Brandon J., Hess, Molly, Burt, Justin L., Maloney, Todd D., Johnson, Martin D., Laurila, Michael E., Cope, Richard F., Luciani, Carla V., Buser, Jonas Y., Campbell, Bradley M., Forst, Mindy B., Mitchell, David, Braden, Timothy M., Lippelt, Christopher K., Boukerche, Moussa, Starkey, Derek R., Miller, Richard D., Chen, Jing, Sun, Baoquan, Kwok, Martin, Zhang, Xin, Tadayon, Sam, Huang, Ping

Technology transfer of a small volume continuous (SVC) process and Current Good Manufacturing Practices (cGMP) manufacturing of merestinib are described. A hybrid batch-SVC campaign was completed at a contract manufacturing organization under cGMP. The decision process by which unit operations...

Simplified end-to-end continuous manufacturing by feeding API suspensions in twin-screw wet granulation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Schmidt, A, de, Waard, HMoll, KP, Kleinebudde, P, Krumme, M

This study focussed on investigating the coupling of continuous manufacturing of drug substance and continuous manufacture of drug product. An important step in such an integrated end-to-end continuous manufacturing was envisioned by dosing the API as suspension into a twin-screw wet granulation...

Simulation-Based Design of an Efficient Control System for the Continuous Purification and Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sen, M, Singh, R, Ramachandran, R

In this study, an efficient system-wide controlsystem has been designed for the integrated continuous purification and processing of the active pharmaceutical ingredient (API). The control strategy is based on the regulatory PID controller which is most widely used in the manufacturing industry...

Residence Time Distribution (RTD)-Based Control System for Continuous Pharmaceutical Manufacturing Process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Bhaskar, Aparajith, Singh, Ravendra

Real-Time Monitoring of Powder Mass Flowrates for Plant-Wide Control of a Continuous Direct Compaction Tablet Manufacturing Process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Huang, Yan-Shu, Medina-González, Sergio Straiton, Benjamin Keller, Joshua, Marashdeh, Qussai, Gonzalez, Marcial, Nagy, Zoltan, Reklaitis, Gintaras V.

While measurement and monitoring of powder/particulate mass flow rate are not essential to the execution of traditional batch pharmaceutical tablet manufacturing, in continuous operation, it is an important additional critical process parameter. It has a key role both in establishing that the...

Quality Risk Assessment and Mitigation of Pharmaceutical Continuous Manufacturing Using Flowsheet Modeling Approach

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Tian, Geng;, Koolivand, Abdollah, Arden, Nilou S., Lee, Sau, O'Connor, Thomas F.

Integrated flowsheet modeling is an engineering approach that can provide a framework for understanding the impact of process dynamics on drug quality and associated risks during production, thereby facilitating the development of robust continuous processes. In this investigation, flowsheet...

Process optimization for continuous extrusion wet granulation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Tan, L, Carella, AJ, Ren, YK, Lo, JB

Three granulating binders in high drug-load acetaminophen blends were evaluated using high shear granulation and extrusion granulation. A polymethacrylate binder enhanced tablet tensile strength with rapid disintegration in simulated gastric fluid, whereas polyvinylpyrrolidone and hydroxypropyl...

Process dynamics and control of API manufacturing and purification processes

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sen, Maitraye, Singh, Ravendra, Ramachandran, Rohit

The pharmaceutical industries have started transitioning toward continuous mode of manufacturing recently. Due to many advantages of the continuous manufacturing over the traditional alternatives, the industries are putting huge effort to efficiently adapt the continuous processing mode. However,...

Process design applied to optimise a directly compressible powder produced via a continuous manufacturing process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Gonnissen, Y., Goncalves, S. I. V., De Geest, B. G., Remon, J. P., Vervaet, C.

Manufacturing of 'ready-to-compress' powder mixtures for direct compression was performed by spray drying, without granulation, milling and/or blending steps in between spray drying and compaction. Powder mixtures containing acetaminophen, mannitol, erythritol, maltodextrin, crospovidone,...

Powder composition monitoring in continuous pharmaceutical solid-dosage form manufacturing using state estimation-Proof of concept

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Destro, Francesco, Munoz, Salvador Garcia, Bezzo, Fabrizio, Barolo, Massimiliano

In continuous solid-dosage form manufacturing, the powder feeding system is responsible for supplying downstream the correct formulation of the drug product ingredients. The composition of the powder delivered by the feeding system is inferred from the measurements of powder mass flow from the...

Pharmaceutical Crystallization

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Chen, J, Sarma, BEvans, JMB, Myerson, AS

Crystallization is crucial in the pharmaceutical industry as a separation process for intermediates and as the final step in the manufacture of active pharmaceutical ingredients (APIs). In this perspective article to celebrate 10 years of Crystal Growth & Design, we focus on three areas related...

PAT Implementation on a Mobile Continuous Pharmaceutical Manufacturing System: Real-Time Process Monitoring with In-Line FTIR and Raman Spectroscopy

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Miyai, Yuma, Formosa, Anna, Armstrong, Cameron, Marquardt, Brian, Rogers, Luke, Roper, Thomas

The strategies and experimental methods for implementation of process analytical technology (PAT) on the mobile pharmaceutical manufacturing system, Pharmacy on Demand (PoD), are discussed. With multiple processes to be monitored on the PoD end-to-end continuous manufacturing process, PAT and its...

Optimized continuous pharmaceutical manufacturing via model-predictive control

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Rehrl, Jakob, Kruisz, Julia, Sacher, Stephan, Khinast, Johannes, Horn, Martin

This paper demonstrates the application of model-predictive control to a feeding blending unit used in continuous pharmaceutical manufacturing. The goal of this contribution is, on the one hand, to highlight the advantages of the proposed concept compared to conventional PI-controllers, and, on...

On-Demand Continuous Manufacturing of Ciprofloxacin in Portable Plug-and-Play Factories: Development of a Highly Efficient Synthesis for Ciprofloxacin

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Armstrong, Cameron, Miyai, Yuma, Formosa, Anna, Thomas Dale, Chen, Esther, Hart, Travis, Schultz, Victor, Desai, Bimbisar, Cai, Angela, Almasy, Alexandra, Jensen, Klavs, Roper, Thomas

The experimental approach taken and challenges overcome in developing a high-purity production (>100 g) scale process for the telescoped synthesis of the antibiotic ciprofloxacin is outlined. The process was first optimized for each step sequentially with regard to purity and yield, with...

On-Demand Continuous Manufacturing of Ciprofloxacin in Portable Plug-and-Play Factories: Implementation and in Situ Control of Downstream Production

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Capellades, Gerard, Neurohr, Clemence Briggs, Naomi Rapp, Kersten, Hammersmith, Gregory, Brancazio, David, Derksen, Bridget, Myerson, Allan S.

Traditional pharmaceutical manufacturing operates around a supply chain that is subject to complex logistics and is vulnerable to spikes in demand and interruptions. In this context, continuous pharmaceutical manufacturing in portable, refrigerator-sized factories is a promising solution with...

Multi-scale flowsheet simulation of an integrated continuous purification-downstream pharmaceutical manufacturing process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sen, M, Chaudhury, ASingh, R, John, J, Ramachandran, R

Properties of active pharmaceutical ingredients influence the critical quality attributes (CQAs) of final solid dosage forms (e. g. tablets). In the last decade, continuous manufacturing has been shown to be a promising alternative to batch processing in the pharmaceutical industry. Therefore, a...