Critical review on the role of excipient properties in pharmaceutical powder-to-tablet continuous manufacturing

13 Aug 2024 | Peer-reviewed journal | Contributor(s): Sara Fathollahi, Pauline H. M. Janssen, Bastiaan H. J. Dickhoff, Henderik W. Frijlink

The pharmaceutical industry is gradually changing batch-wise manufacturing processes to continuous manufacturing processes, due to the advantages it has to offer. The final product quality and process efficiency of continuous manufacturing processes is among others impacted by the properties of...

Critical review on the role of excipient properties in pharmaceutical powder-to-tablet continuous manufacturing

13 Aug 2024 | Peer-reviewed journal | Contributor(s): Sara Fathollahi, Pauline H. M. Janssen, Bastiaan H. J. Dickhoff, Henderik W. Frijlink

The pharmaceutical industry is gradually changing batch-wise manufacturing processes to continuous manufacturing processes, due to the advantages it has to offer. The final product quality and process efficiency of continuous manufacturing processes is among others impacted by the properties of...

Process intensification of pharmaceutical powder blending at commercial throughputs by utilizing semi-continuous mini-blending

13 Aug 2024 | Peer-reviewed journal | Contributor(s): Maarten Jaspers, Florian Tegel, Timo P. Roelofs, Fabian Starsich, Yunfei Li Song, Bernhard Meir, Richard Elkes, Bastiaan H.J. Dickhoff

Process intensification involves the miniaturization of equipment while retaining process throughput and performance. The pharmaceutical industry can benefit from this approach especially during drug product development, where the availability of active pharmaceutical ingredients (API) is often...

The Use of a Closed Feed Frame for the Development of Near-Infrared Spectroscopic Calibration Model to Determine Drug Concentration

23 Jul 2024 | Peer-reviewed journal | Contributor(s): Movilla-Meza, Nathaly A., Sierra-Vega, Nobel O., Alvarado-Hernández, Bárbara B., Méndez, Rafael, Romañach, Rodolfo J.

Purpose: This study evaluates the use of the closed feed frame as a material sparing approach to develop near-infrared (NIR) spectroscopic calibration models for monitoring blend uniformity. The effect of shear induced by recirculation on NIR spectra was also studied. Methods: Calibration models...

Cleaning of direct compression continuous manufacturing equipment through displacement of API residues by excipients

23 Jul 2024 | Peer-reviewed journal | Contributor(s): Patel, Dhavalkumar S, Méndez, Rafael, Romañach, Rodolfo J

This feasibility study evaluates a cleaning process designed to avoid the use of detergents and reduce operator exposure to the active pharmaceutical ingredient (API). The continuous manufacturing equipment was cleaned using excipients to displace ibuprofen residues from the system. The cleaning...

Control oriented modeling of twin-screw granulation in the ConsiGmaTM-25 production plant

09 Jul 2024 | Peer-reviewed journal | Contributor(s): Johannes Khinast, Martin Horn, Jakob Rehrl, Selma Celikovic, Johannes Poms

ConsiGmaTM-25 is a continuous production plant integrating a twin-screw granulation, fluid bed drying, granule conditioning, and a tableting unit. The particle size distribution (PSD), active pharmaceutical ingredient (API) content, and liquid content of wet granules after twin-screw...

Implementation of a fully integrated continuous manufacturing line for direct compression and coating at a commercial pharmaceutical facility – Part 1: Operational considerations and control strategy

25 Jun 2024 | Peer-reviewed journal | Contributor(s): Conway, Stephen L., Rosas, Juan G., Overton, Paul, Tugby, Neil, Cryan, Phillip, Witulski, Frank, Hurley, Samantha, Wareham, Laura, Tantuccio, Anthony, Ramasamy, Manoharan, Lalloo, Anita, Gibbs, Mason, Meyer, Robert F.

We implement a fully integrated continuous manufacturing (CM) line for direct compression and coating of a pharmaceutical oral solid dosage form in a commercial production facility. In this first paper of a two-part series, we describe process design and operational choices made to introduce CM...

Implementation of a fully integrated CM direct compression and coating process at a commercial pharmaceutical facility - Part 2: PAT and RTD results for normal operational conditions batches.

25 Jun 2024 | Peer-reviewed journal | Contributor(s): Rosas, JG, Brush, P, Thompson, B, Miller, C, Overton, P, Tugby, N, Stoliarskaia, D, Hurley, S, Ramasamy, M, Conway, SL

This is the second of two articles detailing the continuous manufacturing (CM) development and implementation activities for an marketed product which have been realized in novel, qualified equipment, using validated control strategy elements to enable manufacture of batches under current good...

Embracing continuous manufacturing in the pharmaceutical industry

03 Jun 2024 | Website | Contributor(s): Joelle Anselmo

"Drugmakers have been slow to adopt the production process, which experts say can streamline operations, boost data quality and reduce time to market."

MOOC 1 Introduction to Continuous Manufacturing

29 Nov 2023 | Teaching Materials | Contributor(s): RCPE

MOOC I - Batch vs. Continuous Manufacturing: Revolutionizing Medicine Production

29 Nov 2023 | Teaching Materials | Contributor(s): RCPE

MOOC I Introduction - The Advantages and Challenges of Continuous Manufacturing in Pharmaceuticals

29 Nov 2023 | Teaching Materials | Contributor(s): RCPE

In this video, we start exploring the world of continuous manufacturing in the pharmaceutical industry. Discover how this innovative technology is revolutionizing the production of medicines, its advantages over traditional batch manufacturing, and the challenges it presents. Join us as we delve...

CDER's Emerging Technology Program

20 Nov 2023 | Workshop | Contributor(s): Thomas O’Connor

Emerging Technology Program (ETP) OverviewETP TrendsLifecycle of an Emerging TechnologyInteracting with the ETPPharmaceutical Quality Symposium 2023: Quality, Supply Chain & Advanced Manufacturing - 10/31/2023 | FDA

Lubricant Sensitivity of Direct Compression Grades of Lactose in Continuous and Batch Tableting Process

16 Nov 2023 | Peer-reviewed journal | Contributor(s): Gerald A. Hebbink, Pauline H. M. Janssen, Jurjen H. Kok, Lorenzo Menarini, Federica Giatti, Caterina Funaro, Salvatore Fabrizio Consoli, Bastiaan H. J. Dickhoff

Modern pharmaceutical manufacturing based on Quality by Design and digitalisation is revolutionising the pharmaceutical industry. Continuous processes are promoted as they increase efficiency and improve quality control. Compared to batch blending, continuous blending is easier to scale and...

Effect of batch-to-batch variation of spray dried lactose on the performance of feeders

10 Aug 2023 | Peer-reviewed journal | Contributor(s): Carlota Mendez Torrecillas, Florian Tegel, Ralf Weinekötter, Bernhard Meir, Bastiaan H.J. Dickhoff, Sri Sharath Kulkarni, Pauline H.M. Janssen

With the emergence of quality by design (QbD), it becomes imperative to gain understanding of the impact of batch-to-batch variability of raw materials on the performance of processes. Feeding is the first unit of operation in a continuous manufacturing line and is critical for the final product...

Why We Need Continuous Pharmaceutical Manufacturing and How to Make It Happen

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Clive Badman, Charles L.Cooney, Alastair Florence, Konstantin Konstantinov, Markus Krumme, Salvatore Mascia, Moheb Nasr, Bernhardt L. Trout

We make the case for why continuous pharmaceutical manufacturing is essential, what the barriers are, and how to overcome them. To overcome them, government action is needed in terms of tax incentives or regulatory incentives that affect time.

Videometric mass flow control: A new method for real-time measurement and feedback control of powder micro-feeding based on image analysis

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Madarasz, L, Kote, AGyurkes, M, Farkas, A, Hambalko, B, Pataki, H, Fulop, G, Marosi, G, Lengyel, L, Casian, T, Csorba, K, Nagy, ZK

The present paper reports the first monitoring and control of ultra-low dose powder feeding using a camera image-based mass flow measurement system. Caffeine was fed via a single-screw microfeeder as a model active pharmaceutical ingredient (API). The mass, mass flow and sizes of the particles...

Use of near-infrared spectroscopy to quantify drug content on a continuous blending process: Influence of mass flow and rotation speed variations

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Martínez, Lizbeth, Peinado, Antonio, Liesum, Lorenz, Betz, Gabriele

The aim of this study was to develop a quantitative Near-Infrared (NIR) method which monitors the homogeneity of a pharmaceutical formulation coming out of a continuous blender. For this purpose, a NIR diode array spectrometer with fast data acquisition was selected. Additionally, the dynamic...

Use of the channel fill level in defining a design space for twin screw wet granulation

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Gorringe, L. J., Kee, G. S., Saleh, M. F., Fa, N. H., Elkes, R. G.

Twin screw wet granulation is a key process in the continuous manufacture of oral solid dosage forms. Previous Research Article has qualitatively suggested that the channel fill level influences the granules produced. In this paper a quantitative measure of the total volumetric fraction of the...

Using a material property library to find surrogate materials for pharmaceutical process development

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Escotet-Espinoza, MS, Moghtadernejad, SScicolone, J, Wang, YF, Pereira, G, Schafer, E, Vigh, T, Klingeleers, D, Ierapetritou, M, Muzzio, FJ

Material properties are known to have a significant impact on pharmaceutical manufacturing performance, particularly for solid product processes. Evaluating the performance of a specific material, for example an active pharmaceutical ingredient or excipient, is critical during development stages...

Using residence time distribution in pharmaceutical solid dose manufacturing–A critical review

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Bhalode, Pooja, Tian, Huayu Gupta, Shashwat Razavi, Sonia M Roman-Ospino, Andres Talebian, Shahrzad Singh, Ravendra Scicolone, James V Muzzio, Fernando J, Ierapetritou, Marianthi

While continuous manufacturing (CM) of pharmaceutical solid-based drug products has been shown to be advantageous for improving the product quality and process efficiency in alignment with FDA’s support of the quality-by-design paradigm (Lee, 2015; Ierapetritou et al., 2016; Plumb, 2005; Schaber,...

Using Residence Time Distributions (RTDs) to Address the Traceability of Raw Materials in Continuous Pharmaceutical Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Engisch, William, Muzzio, Fernando

Continuous processing in pharmaceutical manufacturing is a relatively new approach that has generated significant attention. While it has been used for decades in other industries, showing significant advantages, the pharmaceutical industry has been slow in its adoption of continuous processing,...

TPLS as predictive platform for twin-screw wet granulation process and formulation development

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Ryckaert, A., Van Hauwermeiren, D., Dhondt, J., De Man, A., Funke, A., Djuric, D., Vervaet, C., Nopens, I., De Beer, T.

In recent years, the interest in continuous manufacturing techniques, such as twin-screw wet granulation, has increased. However, the understanding of the influence of the combination of raw material properties and process settings upon the granule quality attributes is still limited. In this...

Tracking raw material flow through a continuous direct compression line. Part II of II: Predicting dynamic changes in quality attributes of tablets due to disturbances in raw material properties using an independent residence time distribution model

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Peterwitz, M, Buchgeister, SMeier, R, Schembecker, G

Continuous manufacturing of pharmaceuticals promises many advantages regarding economics and quality. However, tracing deviating material in such processes is much more challenging than in batch processes due to axial back-mixing. The literature has proven the traceability of disturbances in the...