Critical review on the role of excipient properties in pharmaceutical powder-to-tablet continuous manufacturing

13 Aug 2024 | Peer-reviewed journal | Contributor(s): Sara Fathollahi, Pauline H. M. Janssen, Bastiaan H. J. Dickhoff, Henderik W. Frijlink

The pharmaceutical industry is gradually changing batch-wise manufacturing processes to continuous manufacturing processes, due to the advantages it has to offer. The final product quality and process efficiency of continuous manufacturing processes is among others impacted by the properties of...

Process intensification of pharmaceutical powder blending at commercial throughputs by utilizing semi-continuous mini-blending

13 Aug 2024 | Peer-reviewed journal | Contributor(s): Maarten Jaspers, Florian Tegel, Timo P. Roelofs, Fabian Starsich, Yunfei Li Song, Bernhard Meir, Richard Elkes, Bastiaan H.J. Dickhoff

Process intensification involves the miniaturization of equipment while retaining process throughput and performance. The pharmaceutical industry can benefit from this approach especially during drug product development, where the availability of active pharmaceutical ingredients (API) is often...

Using Residence Time Distributions (RTDs) to Address the Traceability of Raw Materials in Continuous Pharmaceutical Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Engisch, William, Muzzio, Fernando

Continuous processing in pharmaceutical manufacturing is a relatively new approach that has generated significant attention. While it has been used for decades in other industries, showing significant advantages, the pharmaceutical industry has been slow in its adoption of continuous processing,...

Using online mass spectrometry to predict the end point during drying of pharmaceutical products

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Dodda, Aditya G., Saranteas, Kostas, Henson, Michael A.

Drying of active pharmaceutical ingredients (APIs) is an energy-intensive process that is often a manufacturing bottleneck due to the relatively long processing times. A key objective is the ability to determine the drying end point, the time at which all solvent has been evaporated from the...

Using residence time distribution in pharmaceutical solid dose manufacturing–A critical review

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Bhalode, Pooja, Tian, Huayu Gupta, Shashwat Razavi, Sonia M Roman-Ospino, Andres Talebian, Shahrzad Singh, Ravendra Scicolone, James V Muzzio, Fernando J, Ierapetritou, Marianthi

While continuous manufacturing (CM) of pharmaceutical solid-based drug products has been shown to be advantageous for improving the product quality and process efficiency in alignment with FDA’s support of the quality-by-design paradigm (Lee, 2015; Ierapetritou et al., 2016; Plumb, 2005; Schaber,...

Towards a novel continuous HME-Tableting line: Process development and control concept

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sacher, Stephan, Celikovic, Selma, Rehrl, Jakob, Poms, Johannes, Kirchengast, Martin, Kruisz, Julia, Sipek, Martin, Salar-Behzadi, Sharareh, Berger, Hannes, Stark, Gerald, Horn, Martin, Khinast, Johannes G.

The objective of this study was to develop a novel closed-loop controlled continuous tablet manufacturing line, which first uses hot melt extrusion (HME) to produce pellets based on API and a polymer matrix. Such systems can be used to make complex pharmaceutical formulations, e.g., amorphous...

The synthesis of active pharmaceutical ingredients (APIs) using continuous flow chemistry

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Baumann, M, Baxendale, IR

The implementation of continuous flow processing as a key enabling technology has transformed the way we conduct chemistry and has expanded our synthetic capabilities. As a result many new preparative routes have been designed towards commercially relevant drug compounds achieving more efficient...

The Use of PAT and Off-line Methods for Monitoring of Roller Compacted Ribbon and Granule Properties with a View to Continuous Processing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): McAuliffe M.A.P., Omahony G.E., Blackshields C.A., Collins J.A., Egan D.P., Kiernan L., Oneill E., Lenihan S., Walker G.M., Crean A.M.

Real-time process monitoring using process analytical technology (PAT) tools can augment process understanding, enable improved process control, and hence facilitate the production of high-quality pharmaceutical products. While beneficial for batch processes, the availability of PAT tools to...

The scope of PAT in real-time advanced control of tablet quality

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Singh, Ravendra, Ierapetritou, Marianthi, Ramachandran, Rohit

Continuous pharmaceutical manufacturing together with process analytical technology (PAT) provides a suitable platform for automatic feed-forward/feed-back (FF/FB) control of the end product quality as desired by quality by design (QbD)-based efficient manufacturing. The precise control of the...

The Changing Face of Process Development & Chemical Manufacturing - A View from the Regulators on Continuous Manufacturing

09 Jun 2023 | Website | Contributor(s): Wiles, Charolotte

Industry wide there is a drive for resource efficiency and flexibility, to adapt quickly in what is increasingly becoming a volatile, changing marketplace. As the ‘patent cliff’ looms for many high-volume API’s, there is also a shift away from blockbusters towards lower volume, higher potency...

System-wide hybrid MPC–PID control of a continuous pharmaceutical tablet manufacturing process via direct compaction

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Singh, Ravendra, Ierapetritou, Marianthi, Ramachandran, Rohit

The next generation of QbD based pharmaceutical products will be manufactured through continuous processing. This will allow the integration of online/inline monitoring tools, coupled with an efficient advanced model-based feedback control systems, to achieve precise control of process variables,...

Surrogate-based Optimization for Pharmaceutical Manufacturing Processes

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Wang, Zilong, Escotet-Espinoza, M Sebastian Singh, Ravendra, Ierapetritou, Marianthi

The development of pharmaceutical manufacturing processes has been facilitated by recent advances in the process simulation area. However, since the simulations are usually complex and the analytical expressions of the model can be unknown, it is difficult to directly apply traditional...

Small-Volume Continuous Manufacturing of Merestinib. Part 1. Process Development and Demonstration

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Cole, KP, Reizman, BJHess, M, Groh, JM, Laurila, ME, Cope, RF, Campbell, BM, Forst, MB, Burt, JL, Maloney, TD, Johnson, MD, Mitchell, D, Polster, CS, Mitra, AW, Boukerche, M, Conder, EW, Braden, TM, Miller, RD, Heller, MR, Phillips, JL, Howell, JR

Development of a small volume continuous process that used a combination of batch and flow unit operations to manufacture the small molecule oncolytic candidate merestinib is described. Continuous processing was enabled following the identification and development of suitable chemical...

Small-Volume Continuous Manufacturing of Merestinib. Part 2.Technology Transfer and cGMP Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Reizman, Brandon J., Hess, Molly, Burt, Justin L., Maloney, Todd D., Johnson, Martin D., Laurila, Michael E., Cope, Richard F., Luciani, Carla V., Buser, Jonas Y., Campbell, Bradley M., Forst, Mindy B., Mitchell, David, Braden, Timothy M., Lippelt, Christopher K., Boukerche, Moussa, Starkey, Derek R., Miller, Richard D., Chen, Jing, Sun, Baoquan, Kwok, Martin, Zhang, Xin, Tadayon, Sam, Huang, Ping

Technology transfer of a small volume continuous (SVC) process and Current Good Manufacturing Practices (cGMP) manufacturing of merestinib are described. A hybrid batch-SVC campaign was completed at a contract manufacturing organization under cGMP. The decision process by which unit operations...

Solvothermal Crystallization Kinetics and Control of Crystal Size Distribution of MOF-808 in a Continuous Flow Reactor

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Bagi, Sujay D., Myerson, Allan S. Román-Leshkov, Yuriy, Román-Leshkov, Yuriy

A fundamental understanding of the crystallization pathways for metal-organic frameworks (MOFs) allows for exploring the untapped combinatorial space of the organic and inorganic building units, creating possibilities to synthesize highly crystalline frameworks with desired physicochemical...

Simulation-Based Design of an Efficient Control System for the Continuous Purification and Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sen, M, Singh, R, Ramachandran, R

In this study, an efficient system-wide controlsystem has been designed for the integrated continuous purification and processing of the active pharmaceutical ingredient (API). The control strategy is based on the regulatory PID controller which is most widely used in the manufacturing industry...

Simulation-Based Design of an Efficient Control System for the Continuous Purification and Processing of Active Pharmaceutical Ingredients

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sen, M, Singh, R, Ramachandran, R

In this study, an efficient system-wide controlsystem has been designed for the integrated continuous purification and processing of the active pharmaceutical ingredient (API). The control strategy is based on the regulatory PID controller which is most widely used in the manufacturing industry...

Selective crystallization of the metastable α-form of L-glutamic acid using concentration feedback control

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Kee, Nicholas C.S., Tan, Reginald B.H. Braatz, Richard D., Braatz, Richard D.

A systematic methodology is presented for the selective crystallization of the metastable form of a monotropic dimorph, L-glutamic acid, for batch cooling crystallization. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy coupled with chemometrics was used to...

Sampling and Analysis in Flow: The Keys to Smarter, More Controllable, and sustainable Fine-Chemical Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Morin, Mathieu, Zhang, Wenyao, Mallik, Debasis, Organ, Michael G

Process analytical technology (PAT) is a system designed to help chemists better understand and control manufacturing processes. PAT systems operate through the combination of analytical devices, reactor control elements, and mathematical models to ensure the quality of the final product through...

Robust nonlinear model predictive control of batch processes

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Nagy, Zoltan K., Braatz, Richard D.

NMPC explicitly addresses constraints and nonlinearities during the feedback control of batch processes. This NMPC algorithm also explicitly takes parameter uncertainty into account in the state estimation and state feedback controller designs. An extended Kalman filter estimates the process...

Residence Time Distribution (RTD)-Based Control System for Continuous Pharmaceutical Manufacturing Process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Bhaskar, Aparajith, Singh, Ravendra

Recent advances in integrated process analytical techniques, modeling, and control strategies to enable continuous biomanufacturing of monoclonal antibodies

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Chopda, Viki, Gyorgypal, Aron Yang, Ou Singh, Ravendra Ramachandran, Rohit Zhang, Haoran Tsilomelekis, George Chundawat, Shishir PS, Ierapetritou, Marianthi G

Continuous bioprocessing is significantly changing the biological drugs (or biologics) manufacturing landscape by potentially improving product quality, process stability, and overall profitability, as was similarly seen during the adoption of advanced manufacturing processes for small molecule...

Residence Time Distribution as a Traceability Method for Lot Changes in A Pharmaceutical Continuous Manufacturing System

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sánchez-Paternina, Adriluz, Martínez-Cartagena, Pedro Li, Jingzhe Scicolone, James Singh, Ravendra Lugo, Yleana C Romañach, Rodolfo J Muzzio, Fernando J, Román-Ospino, Andrés D

Residence time distribution (RTD) models were developed to track raw material lots and investigate batch transitions in a continuous manufacturing system. Two raw materials with similar physical properties (granular metformin and lactose) were identified via Principal Component Analysis (PCA)...

Residence time distribution modelling and in line monitoring of drug concentration in a tablet press feed frame containing dead zones

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Tanimura, Shinji, Singh, Ravendra Román-Ospino, Andrés D, Ierapetritou, Marianthi

The presence of a ‘significant dead zone’ in any continuous manufacturing equipment may affect the product quality and need to be investigated systematically. Dead zone will affect the residence time distribution (RTD) of continuous manufacturing and thus the mixing and product quality. Tablet...

Real-Time Monitoring of Powder Mass Flowrates for Plant-Wide Control of a Continuous Direct Compaction Tablet Manufacturing Process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Huang, Yan-Shu, Medina-González, Sergio Straiton, Benjamin Keller, Joshua, Marashdeh, Qussai, Gonzalez, Marcial, Nagy, Zoltan, Reklaitis, Gintaras V.

While measurement and monitoring of powder/particulate mass flow rate are not essential to the execution of traditional batch pharmaceutical tablet manufacturing, in continuous operation, it is an important additional critical process parameter. It has a key role both in establishing that the...