The Use of a Closed Feed Frame for the Development of Near-Infrared Spectroscopic Calibration Model to Determine Drug Concentration

23 Jul 2024 | Contributor(s): Movilla-Meza, Nathaly A., Sierra-Vega, Nobel O., Alvarado-Hernández, Bárbara B., Méndez, Rafael, Romañach, Rodolfo J.

Purpose: This study evaluates the use of the closed feed frame as a material sparing approach to develop near-infrared (NIR) spectroscopic calibration models for monitoring blend uniformity. The effect of shear induced by recirculation on NIR spectra was also studied. Methods: Calibration models...

Cleaning of direct compression continuous manufacturing equipment through displacement of API residues by excipients

23 Jul 2024 | Contributor(s): Patel, Dhavalkumar S, Méndez, Rafael, Romañach, Rodolfo J

This feasibility study evaluates a cleaning process designed to avoid the use of detergents and reduce operator exposure to the active pharmaceutical ingredient (API). The continuous manufacturing equipment was cleaned using excipients to displace ibuprofen residues from the system. The cleaning...

Control oriented modeling of twin-screw granulation in the ConsiGmaTM-25 production plant

09 Jul 2024 | Peer-reviewed journal | Contributor(s): Johannes Khinast, Martin Horn, Jakob Rehrl, Selma Celikovic, Johannes Poms

ConsiGmaTM-25 is a continuous production plant integrating a twin-screw granulation, fluid bed drying, granule conditioning, and a tableting unit. The particle size distribution (PSD), active pharmaceutical ingredient (API) content, and liquid content of wet granules after twin-screw...

Automated and continuous synthesis of drug substances

24 Apr 2024 | Peer-reviewed journal | Contributor(s): Sacher, Stephan, Castillo, Ismael, Rehrl, Jakob, Sagmeister, Peter, Lebl, René, Kruisz, Julia, Celikovic, Selma, Sipek, Martin, Williams, Jason D., Kirschneck, Dirk, Kappe, C. Oliver, Horn, Martin

A continuous synthesis line was developed integrating different common reaction steps namely nitration, substitution and hydrogenation. Mesalazine as model drug substance was produced from 2-chlorobenzoic acid in continuous flow mode. A multi-instrument PAT strategy was implemented to equip the...

Videometric mass flow control: A new method for real-time measurement and feedback control of powder micro-feeding based on image analysis

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Madarasz, L, Kote, AGyurkes, M, Farkas, A, Hambalko, B, Pataki, H, Fulop, G, Marosi, G, Lengyel, L, Casian, T, Csorba, K, Nagy, ZK

The present paper reports the first monitoring and control of ultra-low dose powder feeding using a camera image-based mass flow measurement system. Caffeine was fed via a single-screw microfeeder as a model active pharmaceutical ingredient (API). The mass, mass flow and sizes of the particles...

Using Residence Time Distributions (RTDs) to Address the Traceability of Raw Materials in Continuous Pharmaceutical Manufacturing

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Engisch, William, Muzzio, Fernando

Continuous processing in pharmaceutical manufacturing is a relatively new approach that has generated significant attention. While it has been used for decades in other industries, showing significant advantages, the pharmaceutical industry has been slow in its adoption of continuous processing,...

The Use of Near-Infrared and Microwave Resonance Sensing to Monitor a Continuous Roller Compaction Process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Austin, John, Gupta, Anshu, Mcdonnell, Ryan, Reklaitis, Gintaras V., Harris, Michael T

Roller compaction is commonly used in the pharmaceutical and nutraceutical industries to increase and narrow the size distribution of a particulate material, making it easier to process. Both the moisture content of the material and the density of the roller compacted ribbon affect the uniformity...

The Future of Pharmaceutical Manufacturing Sciences

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Rantanen, Jukka, Khinast Johannes

The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial-scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies is...

Supervisory Control System for Monitoring a Pharmaceutical Hot Melt Extrusion Process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Markl, Daniel, Wahl, Patrick R, Menezes, José C, Koller, Daniel M, Kavsek, Barbara, Francois, Kjell, Roblegg, Evaa, Khinast, Johannes G.

Continuous pharmaceutical manufacturing processes are of increased industrial interest and require uni- and multivariate Process Analytical Technology (PAT) data from different unit operations to be aligned and explored within the Quality by Design (QbD) context. Real-time pharmaceutical process...

Robustness of a continuous direct compression line against disturbances in feeding

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Karttunen A.-P., Poms J., Sacher S., Sparén A., Ruiz Samblás C., Fransson M., Martin De Juan L., Remmelgas J., Wikström H., Hsiao W.-K., Folestad S., Korhonen O.

The aim of the current study was to characterize the robustness of an integrated continuous direct compression (CDC) line against disturbances from feeding, i.e. impulses of API and short step disturbances. These disturbances mimicked typical variations that can be encountered during long-term...

Roller compaction: Infrared thermography as a PAT for monitoring powder flow from feeding to compaction zone

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Yu, Mingzhe, Omar, Chalak, Weidemann, Marcus, Schmidt, Alexander, Litster, James D., Salman, Agba D.

Roller compaction is a continuous dry granulation process, in which powder is compressed by two counter-rotating rollers. During this process, the powder feeding to the compaction zone has a significant effect on product quality. This work investigates the flow of powder from the feeding zone to...

Real-time monitoring of drug concentration in a continuous powder mixing process using NIR spectroscopy

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Vanarase, Aditya, Alcalà, Manel, Jerez-Rozo, Jackeline, Muzzio, Fernando, Romañach, Rodolfo

A non-destructive NIR spectroscopic method was used to acquire on-line spectra of a continuous mixing process, and evaluate the performance of this novel system. Partial least squares (PLS) calibration models were developed and used for real-time determination of active ingredient concentration...

Real-time process monitoring in a semi-continuous fluid-bed dryer - microwave resonance technology versus near-infrared spectroscopy

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Peters, Johanna, Teske, Andreas, Taute, Wolfgang, Döscher, Claas, Höft, Michael, Knöchel, Reinhard, Breitkreutz, Jörg

The trend towards continuous manufacturing in the pharmaceutical industry is associated with an increasing demand for advanced control strategies. It is a mandatory requirement to obtain reliable real-time information on critical quality attributes (CQA) during every process step as the decision...

Real-Time Quantification of Low-Dose Cohesive Formulations within a Sampling Interface for Flowing Powders

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Sierra-Vega, Nobel. O., Romañach, Rodolfo J., Mendez, Rafael

This study investigates the performance of a sampling interface for monitoring cohesive, flowing powder formulations with Hausner's Ratio and Carr's Index higher than 1.5 and 35%, respectively. The sampler device was operated in combination with near-infrared (NIR) spectroscopy to quantify...

Real-time monitoring of particle size distribution in a continuous granulation and drying process by near infrared spectroscopy

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Pauli, V, Roggo, YKleinebudde, P, Krumme, M

In continuous granulation, it can be important to control granules particle size distribution (PSD), as it may affect final product quality. Near infrared spectroscopy (NIRS) is already a routine analytical procedure within pharmaceutical continuous manufacturing for the in-line analysis of...

Real-time feedback control of twin-screw wet granulation based on image analysis

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Madarasz, Lajos, Hoffer, Istvan, Szabo, Barnabas, Csontos, Istvan, Pataki, Hajnalka, Demuth, Balazs, Szabo, Bence, Csorba, Kristof, Nagy, Zsombor Kristof, Marosi, Gyorgy

The present paper reports the first dynamic image analysis-based feedback control of continuous twin-screw wet granulation process. Granulation of the blend of lactose and starch was selected as a model process. The size and size distribution of the obtained particles were successfully monitored...

Real-Time Monitoring of Powder Mass Flowrates for Plant-Wide Control of a Continuous Direct Compaction Tablet Manufacturing Process

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Huang, Yan-Shu, Medina-González, Sergio Straiton, Benjamin Keller, Joshua, Marashdeh, Qussai, Gonzalez, Marcial, Nagy, Zoltan, Reklaitis, Gintaras V.

While measurement and monitoring of powder/particulate mass flow rate are not essential to the execution of traditional batch pharmaceutical tablet manufacturing, in continuous operation, it is an important additional critical process parameter. It has a key role both in establishing that the...

Real-time process monitoring in a semi-continuous fluid-bed dryer - microwave resonance technology versus near-infrared spectroscopy

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Peters, Johanna, Teske, Andreas, Taute, Wolfgang, Döscher, Claas, Höft, Michael, Knöchel, Reinhard, Breitkreutz, Jörg

The trend towards continuous manufacturing in the pharmaceutical industry is associated with an increasing demand for advanced control strategies. It is a mandatory requirement to obtain reliable real-time information on critical quality attributes (CQA) during every process step as the decision...

Raman Spectroscopy for Monitoring the Continuous Crystallization of Carbamazepine

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Acevedo, D, Mohammad, Adil, Pavurala, Naresh, Wu, Wei-Lee, O'Connor, Thomas F., Nagy, Zoltan K, Yang, Xiaochuan, Cruz, CN

Crystallization has a significant impact on the properties of the active pharmaceutical ingredient (API) since it is the final step in the manufacturing of the drug substance and determines particle size distribution, purity, shape, and polymorphs. Many publications have focused on the...

Quality-by-Design III: Application of Near-Infrared Spectroscopy to Monitor Roller Compaction In-process and Product Quality Attributes of Immediate Release Tablets

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Kona, Ravikanth, Fahmy, Raafat M., Claycamp, Gregg, Polli, James E., Martinez, Marilyn, Hoag, Stephen W.

The objective of this study is to use near-infrared spectroscopy (NIRS) coupled with multivariate chemometric models to monitor granule and tablet quality attributes in the formulation development and manufacturing of ciprofloxacin hydrochloride (CIP) immediate release tablets. Critical roller...

Process analytical technology for continuous manufacturing tableting processing: A case study

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Pauli, Victoria, Pellegatti, Laurent, Nguyen Trung, Nhat Quang, Elbaz, Frantz, Ensslin, Simon, Kleinebudde, Peter, Roggo, Yves, Krumme, Markus

The use of Near Infrared Spectroscopy (NIRS) as a fast and non-destructive technique was employed for the control and monitoring of the tableting step during a continuous manufacturing process. Two NIRS methods were optimized in order to in-line control the blend uniformity in the tablet feed...

Process analytical technology in continuous manufacturing of a commercial pharmaceutical product

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Vargas, Jenny, Nielsen, Sarah, Cárdenas, Vanessa, Gonzalez, Anthony, Aymat, Efrain, Almodovar, Elvin, Classe, Gustavo, Colón, Yleana, Sanchez, Eric, Romañach, Rodolfo

The implementation of process analytical technology and continuous manufacturing at an FDA approved commercial manufacturing site is described. In this direct compaction process the blends produced were monitored with a Near Infrared (NIR) spectroscopic calibration model developed with partial...

Process analytical technology in continuous manufacturing of a commercial pharmaceutical product

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Vargas, Jenny, Nielsen, Sarah, Cárdenas, Vanessa, Gonzalez, Anthony, Aymat, Efrain, Almodovar, Elvin, Classe, Gustavo, Colón, Yleana, Sanchez, Eric, Romañach, Rodolfo

The implementation of process analytical technology and continuous manufacturing at an FDA approved commercial manufacturing site is described. In this direct compaction process the blends produced were monitored with a Near Infrared (NIR) spectroscopic calibration model developed with partial...

PAT for pharmaceutical manufacturing process involving solid dosages forms

09 Jun 2023 | Peer-reviewed journal | Contributor(s): Román-Ospino, Andrés D, Cárdenas, Vanessa Ortega-Zuñiga, Carlos, Singh, Ravendra

This chapter summarizes important considerations to develop multivariate methods for pharmaceuticals process monitoring and quality control in solid dosages forms based on spectroscopic techniques. The stages described in each section aimed to explain relevant knowledge of the calibration...