-
Compaction properties of melt coated coarse drug particles
Contributor(s):: Gren, T, Nystrom, C
Xylitol and stearic acid were applied onto the surfaces of coarse particles of paracetamol and acetylsalicylic acid by continuous multipurpose melt technology. The effect of melt coating on radial and axial tensile strength was studied and compared to that of dry mixing of paracetamol and...
-
Challenges in tracing material flow passing a loss-in-weight feeder in continuous manufacturing processes
Contributor(s):: Peterwitz, Moritz, Gerling, Sina, Schembecker, Gerhard
Loss-in-weight feeders are an integral part of most continuous manufacturing processes, ensuring a constant mass flow. The feeders cause a significant degree of back-mixing in such lines. Understanding back-mixing is essential for the treatment of disturbances. However, feeders refilled...
-
Challenges, opportunities and recent advances in near infrared spectroscopy applications for monitoring blend uniformity in the continuous manufacturing of solid oral dosage forms
Contributor(s):: Velez, Natasha L., Drennen, James K., Anderson, Carl A.
Near infrared (NIR) spectroscopy has been widely recognized as a powerful PAT tool for monitoring blend uniformity in continuous manufacturing (CM) processes. However, the dynamic nature of the powder stream and the fast rate at which it moves, compared to batch processes, introduces challenges...
-
Characteristics of multi-component formulation granules formed using distributive mixing elements in twin screw granulation
Contributor(s):: Pradhan, Shankali U., Sen, Maitraye, Li, Jiayu, Gabbott, Ian, Reynolds, Gavin, Litster, James D., Wassgren, Carl R.
This work examines the influence of pharmaceutical powder formulation characteristics on granule properties formed using distributive mixing elements (DMEs) in twin screw granulation. High and low drug dose formulations with three different active pharmaceutical ingredients (APIs) were...
-
Characteristics of residence time distribution in a continuous high shear mixer granulation using scraper rotation
Contributor(s):: Tomita, Yosuke, Takeuchi, Yoshiko, Natsuyama, Susumu, Takeuchi, Hirofumi
Characteristics of residence time distribution (RTD) in a continuous high shear mixer granulation were investigated to promote the development of a continuous manufacturing process in the pharmaceutical industry. A continuous granulator with an impeller and a scraper was utilized. The tracer...
-
Characterization of a novel hydroxypropyl methylcellulose (HPMC) direct compression grade excipient for pharmaceutical tablets
Contributor(s):: Allenspach, Carl, Timmins, Peter, Sharif, Shasad, Minko, Tamara
Controlled release tablets are important dosage forms enabling a slower release of the drug and better pharmacokinetics for some drugs and hydrophilic matrix tablets utilizing hydroxypropyl methylcellulose (HPMC) are one of the most common types. One of the main challenges with using HPMC is its...
-
Characterization of material properties
Contributor(s):: Razavi, Sonia, Oka, Sarang, Escotet-Espinoza, M. Sebastian, Wang, Yifan, Li, Tianyi, Futran Mauricio., Muzzio, Fernando
This chapter describes the importance of deepening our understanding of material properties and their effect on process performance. There are many measurement techniques to describe the complex nature of powders, some of which are provided in this chapter. Strong knowledge of multivariate...
-
Characterization of Near-Infrared and Raman Spectroscopy for In-Line Monitoring of a Low-Drug Load Formulation in a Continuous Manufacturing Process
Contributor(s):: Harms, Zachary, Shi, Zhenqi: Kulkarni, Rajesh, Myers, David P.
Reflectance spectroscopy is an excellent candidate for process analytical technology (PAT) applications in continuous manufacturing of pharmaceutical tablets. Spectroscopic methods provide a real-time, nondestructive measurement of the active pharmaceutical ingredient (API) concentration in order...
-
Breakage and drying behaviour of granules in a continuous fluid bed dryer: Influence of process parameters and wet granule transfer
Contributor(s):: De Leersnyder, F., Vanhoorne, V., Bekaert, H., Vercruysse, J., Ghijs, M., Bostijn, N., Verstraeten, M., Cappuyns, P., Van Assche, I., Vander Heyden, Y., Ziemons, E., Remon, J. P., Nopens, I., Vervaet, C., De Beer, T.
Although twin screw granulation has already been widely studied in recent years, only few studies addressed the subsequent continuous drying which is required after wet granulation and still suffers from a lack of detailed understanding. The latter is important for optimisation and control and,...
-
Cellulose Ethers for Extrusion Applications
Contributor(s):: Pinto, Elanor, Duerig, Thomas
Cellulose ethers have been used for years in developing oral dosage forms via batch processes such as direct compression and wet granulation. Recent advances in continuous manufacturing have brought about innovative technologies such as hot melt extrusion, melt extrusion granulation, and...
-
Assessment and prediction of tablet properties using transmission and backscattering Raman spectroscopy and transmission NIR spectroscopy
Contributor(s):: Peeters, Elisabeth, Tavares da Silva, Ana Filipa, Toiviainen, Maunu, Van Renterghem, Jeroen, Vercruysse, Jurgen, Juuti, Mikko, Lopes, Joao Almeida, De Beer, Thomas., Vervaet, Chris, Remon, Jean-Paul
This study investigated whether Raman and Near Infrared (NIR) spectroscopy could predict tablet properties. Granules were produced on a continuous line by varying granulation parameters. Tableting process parameters were adjusted to obtain uniform tablet weight and thickness. Spectra were...
-
Assessment of blend uniformity in a continuous tablet manufacturing process
Contributor(s):: Sierra-Vega, Nobel, Román-Ospino, Andrés, Scicolone, James, Muzzio, Fernando, Romañach, Rodolfo, Mendez, Rafael
Blend uniformity was monitored throughout a continuous manufacturing (CM) process by near infrared (NIR) spectroscopic measurements of flowing blends and compared to the drug concentration in the tablets. The NIR spectra were obtained through the chute after the blender and within the feed frame,...
-
Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review
Contributor(s):: Simon, Levente L, Pataki, Hajnalka, Marosi, György, Meemken, Fabian, Hungerbühler, Konrad, Baiker, Alfons, Tummala, Srinivas, Glennon, Brian, Kuentz, Martin, Steele, Gerry, Kramer, Herman J. M, Rydzak, James W.
This multiauthor review article aims to bring readers up to date with some of the current trends in the field of process analytical technology (PAT) by summarizing each aspect of the subject (sensor development, PAT based process monitoring and control methods) and presenting applications both in...
-
Assessment of Robustness for a Near-Infrared Concentration Model for Real-Time Release Testing in a Continuous Manufacturing Process
Contributor(s):: Colon, Yleana, Vargas, Jenny, Sánchez, Eric, Navarro, Gilfredo, Romañach, Rodolfo
This study describes the robustness test of a transmission near-infrared spectroscopic (NIRS) model for prediction of drug concentration in core tablets as part of real-time release testing (RTRt) efforts for a continuous manufacturing process. Seven calibration blend samples were prepared...
-
Assessment of spatial heterogeneity in continuous twin screw wet granulation process using three-compartmental population balance model
Contributor(s):: Liu, Huolong, Galbraith, Shaun C., Park, Seo-Young, Cha, Bumjoon, Huang, Zhuangrong, Meyer, Robert Frederick, Flamm, Matthew H., O'Connor, Thomas, Lee, Sau, Yoon, Seongkyu
In this study, a novel three-compartmental population balance model (PBM) for a continuous twin screw wet granulation process is developed, combining the techniques of PBM and regression process modeling. The developed model links screw configuration, screw speed, and blend throughput with...
-
Asymmetric distribution in twin screw granulation
Contributor(s):: Seem, Tim Chan, Rowson, Neil A., Gabbott, Ian, de Matas, Marcel, Reynolds, Gavin K., Ingram, Andy
Positron Emission Particle Tracking (PEPT) was successfully employed to validate measured transverse asymmetry in material distribution in the conveying zones of a Twin Screw Granulator (TSG). Flow asymmetry was established to be a property of the granulator geometry and dependent on fill level....
-
Application of Near-Infrared Spectroscopy in Real-Time Monitoring of Product Attributes of Ribbed Roller Compacted Flakes
Contributor(s):: Samanta, Asim Kumar, Karande, Atul D., Ng, Ka Yun, Heng, Paul Wan Sia
This study assessed the utility of near-infrared (NIR) spectroscopy for the real-time monitoring of content uniformity and critical quality attributes (tensile strength, Young's modulus, and relative density) of ribbed roller compacted flakes made by axially corrugated or ribbed rolls. A...
-
Application of the quantitative detection of a change in concentration of magnesium stearate in a feeder tube of tableting manufacture by real-time near-infrared spectroscopy
Contributor(s):: Sasakura, D., Nakayama, K., Chikuma, T.
Process analytical technology is important for the analysis and control of manufacturing processes. Near-infrared spectroscopy is widely used in various process analytical technologies for the analysis of the chemical components of solid dosage forms. Lubrication is an important process carried...
-
Application of X-Ray Sensors for In-line and Noninvasive Monitoring of Mass Flow Rate in Continuous Tablet Manufacturing
Contributor(s):: Ganesh, Sudarshan, Troscinski, Rachel, Schmall, Nicholas, Nagy, Zoltan, Reklaitis, Gintaras
The progress in continuous downstream manufacturing of oral solid doses demands effective real-time process management, with monitoring at its core. This study evaluates the feasibility of using a commercial sensor to measure the mass flow rate of the particulates, a critical process variable in...
-
Approach to establishment of control strategy for oral solid dosage forms using continuous manufacturing
Contributor(s):: Ishimoto, Hayato, Kano, Manabu, Sugiyama, Hirokazu, Takeuchi, Hirofumi, Terada, Katsuhide, Aoyama, Atsushi, Shoda, Takuji, Demizu, Yosuke, Shimamura, Jinen, Yokoyama, Reiji, Miyamoto, Yuji, Hasegawa, Koji, Serizawa, Masaru, Unosawa, Kazuomi, Osaki, Kazuo, Asai, Naochika, Matsuda, Yoshihiro
As a result of the Research Article activities of the Japan Agency for Medical Research Article and Development (AMED), this document aims to show an approach to establishing control strategy for continuous manufacturing of oral solid dosage forms. The methods of drug development, technology...
-
Artificial Intelligence Tools for Scaling Up of High Shear Wet Granulation Process
Contributor(s):: Landin, Mariana
The results presented in this article demonstrate the potential of artificial intelligence tools for predicting the endpoint of the granulation process in high-speed mixer granulators of different scales from 25L to 600L. The combination of neurofuzzy logic and gene expression programing...
-
Artificial neural network modelling of continuous wet granulation using a twin-screw extruder
Contributor(s):: Shirazian, Saeed, Kuhs, Manuel, Darwish, Shaza, Croker, Denise., Walker, Gavin M
Computational modelling of twin-screw granulation was conducted by using an artificial neural network (ANN) approach. Various ANN configurations were considered with changing hidden layers, nodes and activation functions to determine the optimum model for the prediction of the process. The neural...
-
Evaluation of three approaches for real-time monitoring of roller compaction with near-infrared spectroscopy
Contributor(s):: Acevedo, D., Muliadi, A., Giridhar, A., Litster, J. D., Romañach, R. J.
Three different approaches have been evaluated for monitoring ribbon density through real-time near-infrared spectroscopy measurements. The roll compactor was operated to produce microcrystalline cellulose (MCC) ribbons of varying densities. The first approach used the slope of the spectra which...
-
Application of continuous twin screw granulation for the metformin hydrochloride extended release formulation
Contributor(s):: Kim, Su-Hyeon, Hwang, Kyu-Min, Cho, Cheol-Hee, Nguyen, Thi-Tram, Seok, Su Hyun, Hwang, Kyu-Mok, Kim, Ju-Young, Park, Chun-Woong, Rhee, Yun-Seok, Park, Eun-Seok
This study focuses on evaluating the potential of transferring from a batch process to continuous process for manufacturing of the extended release formulation. Metformin hydrochloride (HCl) was used in the model formulation which was intended to contain the high amount of hydrophilic drug. The...
-
Application of multivariate methods to compression behavior evaluation of directly compressible materials
Contributor(s):: Haware, Rahul V., Tho, Ingunn, Bauer-Brandl, Annette
The present study is an approach to describe and predict compaction and tablet properties by a combination of a set of commonly used mathematical descriptors and multivariate methods based on continuous compression profiles. Effects of formulation and process parameters (e.g. composition, powder...